Compared with other manufacturing processes, the valve manufacturing process has the following characteristics: â‘ valve blank manufacturing process and inspection process is more complex Valve casting blank is the structure called the complex thin-walled shell parts. The casting requirements of smooth surface, casting a clear, in particular, to have a dense defect. In order to meet the above requirements, a series of process measures should be taken during casting, such as the selection of high refractory molding material and the control of sand moisture, the molding should be layered to ensure real sand to ensure that the hardness, the use of a reasonable system and strict control pouring hat gate Pouring speed and temperature. Due to the high technical requirements, valve casting rough casting process is much more complex than the average castings. In addition, the valve blank in addition to check size, position accuracy and appearance, there are some for the microstructure, mechanical properties, corrosion resistance and non-destructive testing and other tests, so the valve inspection process is more complicated. â‘¡ valve parts installed on the machine more difficult Valve main parts of the structure, the shape is more complex, some parts are thin wall, slender, poor rigidity. When machining on a machine tool, positioning and clamping are difficult and often require complex special fixtures. Some valve parts, the positioning of the base surface of the lower accuracy, high surface roughness, and sometimes even the use of non-machining surface positioning. The machined sealing surface and other parts of the precision and surface roughness are high, it is difficult to ensure the quality of processing. Therefore, to meet the needs of the process, it is often necessary to increase the accuracy of the positioning of the base surface and reduce the surface roughness, or the positioning of non-machined surface of the base surface, which increases the complexity of the valve manufacturing process. â‘¢ machining difficult Due to the wide range of valve materials, in addition to a variety of cast iron, carbon steel, most of its high strength, corrosion resistance and high hardness of the cutting performance of materials are poor, it is difficult to make the parts meet the required processing accuracy And surface roughness. The valve sealing surface geometry and surface roughness of the high requirements, so more difficult to increase the valve machining. At the same time, poor cutting performance of the valve material, but also to the valve processing methods, cutting tool material, cutting dosage, technology and equipment has brought a lot of new problems.
Real Estate Chandelier
Do one stop lighting solution for real estate lighting project, including real estate lighting design,real estate lightingsolution, real estate lighting drawing,real estate lighting production,real estate lighting delivery and installation guidance. Have more than 20000sqm production line,2000sqm showroom could offer you demo show before shipment.
LAVIUS is appointed by Zhongshan G-Lights Lighting Factory as a high end brand of customized indoor decorative project lighting, locates in lighting capital, Guzhen, China. According to more than one decade exploration, research and development, LAVIUS moving toward to the front high brand of customized project lighting for real estate.
Mid-to-high end project lighting and customized lighting devices
Real Estate Chandelier,Chandelier Floor Lamp,Crystal Chandelier,Luxury Chandelier,European Classic Chandelier
GUANGDONG LAVIUS LIGHTING CO., LTD. , https://www.laviuslighting.com