First, maintenance and cleaning Clean the dust on the floor surface, use a neutral detergent or alkaline cleaner to clean the floor.
Specially soiled places and corners can be cleaned with nylon brush cleaners.
Larger areas require the use of a cleaning machine to clean the floor with a low-speed washer (150-200 rpm) with a red pad.
After cleaning, mop the floor with mop and clean water to ensure that all residual cleaner is cleaned from the floor.
Waxing the floor evenly with a layer of wax water will help extend the floor life and reduce maintenance costs.
Decontamination recommends the use of chemicals to treat stubborn stains. Mechanical scrubbing is not recommended.
Do not burn when handling floors.
Decontamination powder will make the floor discolored with caution.
After use for a period of time, if the surface is particularly dirty, the wax layer can be used to remove the surface wax layer, clean it with clean water, reappear waxing, the surface will shine as new, stain removal method blood-urine-faeces: use diluted bleach The agent is removed and then thoroughly washed with water to remove any residue.
Vinegar - tomatoes - mustard: Add a few drops of ammonia to the water to remove the dirt.
Rust: Use a patented product for rust prevention or oxalic acid (total cleaning).
Heavy grease - paint - rubber scratches - hair dye - food oil - ballpoint pen or tag pen: use gasoline, petroleum spirits. Scrub with undiluted detergent and wash thoroughly to remove any residue.
Cigarette burns: For waxed products, lightly grind with very fine sandpaper. Then apply a layer of self-shining emulsion on the entire surface.
Third, precautions Plastic floor materials and all heavy-duty flooring materials need correct, regular maintenance. Regardless of the materials used in the manufacturing process, satisfactory results can only be obtained by following the following basic maintenance rules.
1. Do not use seat cushions with rubber backing. Black rubber will leave hard-to-wipe stains on the floor material.
2. Prevent sharp objects from scratching or scratching the floor surface.
3. Put a layer of isolation pad (without rubber backing) on ​​the entrance and entrance to prevent the sediment from entering the damaged contaminated floor.
4, no smoking, to prevent cigarette butts, electric heaters and other high temperature materials contact the plastic floor.
5. Traces of ink, iodine, etc. should be immediately wiped and cleaned with a neutral cleaner to prevent it from drying out and difficult to remove.
6. Be careful not to use super strong multi-purpose detergent to avoid discoloration of the floor.
7. Replace the tubular furniture feet with pvc or polyurethane feet (do not use rubber feet and wheels).
8. Do not use solvent-based waxes, sealants, polishes, or varnishes. Especially those containing acetone and other pvc solvents.
9. Do not use corrosive solvents such as strong acid, strong alkali, and water to avoid damaging the floor.
10. After the ground is laid for 72 hours, it can be maintained. Do not flood or flush the floor with water.
Specially soiled places and corners can be cleaned with nylon brush cleaners.
Larger areas require the use of a cleaning machine to clean the floor with a low-speed washer (150-200 rpm) with a red pad.
After cleaning, mop the floor with mop and clean water to ensure that all residual cleaner is cleaned from the floor.
Waxing the floor evenly with a layer of wax water will help extend the floor life and reduce maintenance costs.
Decontamination recommends the use of chemicals to treat stubborn stains. Mechanical scrubbing is not recommended.
Do not burn when handling floors.
Decontamination powder will make the floor discolored with caution.
After use for a period of time, if the surface is particularly dirty, the wax layer can be used to remove the surface wax layer, clean it with clean water, reappear waxing, the surface will shine as new, stain removal method blood-urine-faeces: use diluted bleach The agent is removed and then thoroughly washed with water to remove any residue.
Vinegar - tomatoes - mustard: Add a few drops of ammonia to the water to remove the dirt.
Rust: Use a patented product for rust prevention or oxalic acid (total cleaning).
Heavy grease - paint - rubber scratches - hair dye - food oil - ballpoint pen or tag pen: use gasoline, petroleum spirits. Scrub with undiluted detergent and wash thoroughly to remove any residue.
Cigarette burns: For waxed products, lightly grind with very fine sandpaper. Then apply a layer of self-shining emulsion on the entire surface.
Third, precautions Plastic floor materials and all heavy-duty flooring materials need correct, regular maintenance. Regardless of the materials used in the manufacturing process, satisfactory results can only be obtained by following the following basic maintenance rules.
1. Do not use seat cushions with rubber backing. Black rubber will leave hard-to-wipe stains on the floor material.
2. Prevent sharp objects from scratching or scratching the floor surface.
3. Put a layer of isolation pad (without rubber backing) on ​​the entrance and entrance to prevent the sediment from entering the damaged contaminated floor.
4, no smoking, to prevent cigarette butts, electric heaters and other high temperature materials contact the plastic floor.
5. Traces of ink, iodine, etc. should be immediately wiped and cleaned with a neutral cleaner to prevent it from drying out and difficult to remove.
6. Be careful not to use super strong multi-purpose detergent to avoid discoloration of the floor.
7. Replace the tubular furniture feet with pvc or polyurethane feet (do not use rubber feet and wheels).
8. Do not use solvent-based waxes, sealants, polishes, or varnishes. Especially those containing acetone and other pvc solvents.
9. Do not use corrosive solvents such as strong acid, strong alkali, and water to avoid damaging the floor.
10. After the ground is laid for 72 hours, it can be maintained. Do not flood or flush the floor with water.
Bx Ring Joint Gasket ,Bx 155 Ring Gasket,Bx Ring Gasket,Bx 154 Ring Gasket
WENZHOU JINGWEI SEAL TECHNOLOGY CO., LTD , https://www.ringjoint-gasket.com