Figure 24
54) Click OK, D is executed, and the tool path appears in the working area as shown in Figure 25;
Figure 25
3, processing process simulation
55) Click back to the upper function table and J working settings in the main function area, and set the workpiece material and various parameters according to Figure 26;
Figure 26
56) Click OK, click O Operation Management in the main function area, click N-See 2000 in the pop-up operation management dialog box, and the resulting tool path will be used to mill the raw materials as shown in Figure 27.
Figure 27
Previous page next page
CHANGZHOU CLD AUTO ELECTRICAL CO.,LTD , https://www.cld-led.com