This standard applies to the nominal pressure PN1.0MPa-PN4.0MPa, nominal diameter of DN50mm-DN1200mm multi-function pump control valve. The standard technical requirements are introduced as follows: 1. Pressure - temperature level Multi-function pump control valve pressure - temperature rating by the shell, inner parts and control pipe system material pressure - temperature level to determine. The maximum allowable working pressure of multi-functional pump control valve at a certain temperature takes the small value of the maximum allowable working pressure value of shell, inner part and control pipe system material at this temperature. Iron shell pressure - temperature level should be consistent with the provisions of GB / T17241.7. Steel shell pressure - temperature rating should be consistent with the provisions of GB / T9124. For GB / T17241.7, GB / T9124 not specified pressure - temperature grade materials, according to the relevant standards or design requirements. 2. Valve Body Flange Flange and the valve should be cast as a whole. Iron flange type and size should be consistent with the provisions of GB / T17241.6, the technical conditions should be consistent with the provisions of GB / T17241.7; steel flange type and size should be consistent with the provisions of GB / T9113.1, the technical conditions Should comply with the provisions of GB / T9124. 3 valve cover diaphragm seat and diaphragm seat, diaphragm seat and valve body connection type should be flanged. Diaphragm seat and the valve body to connect the number of bolts shall not be less than four. Valve cover and diaphragm seat minimum wall thickness by 2.3 requirements. Valve cover and diaphragm seat flange should be round. Flange sealing surface type can be flat, convex or concave type. 4. Stem, slow closing valve plate, the main valve plate slow closing valve plate and stem should be connected and secure. Slow closing valve plate and the main valve plate sealing type should be sealed metal type. The main valve plate and stem must slide flexible and reliable. The main valve plate and the main valve plate seal can be sealed with metal and non-metallic two types of seals. 5. Diaphragm diaphragm appearance quality should be consistent with the provisions of HG / T3090. When applied to drinking water, the diaphragm material safety should be consistent with the provisions of GB / T17219. 6. Control pipe system Control system components should be able to withstand the highest pressure on the valve, no leakage of all parts. 7. Material Selection of the main components of the material should be JB / T5300 requirements. Copper alloy castings shall comply with the provisions of GB / T12225; gray cast iron castings shall comply with the provisions of GB / T12226, the tensile strength of not less than 200MPa; ductile iron castings shall comply with the provisions of GB / T12227; carbon steel castings shall comply with GB / T12229 provisions; austenitic steel castings should be consistent with the provisions of GB / T12230. Steel multi-function pump control valve casting appearance quality should be consistent with the provisions of JB / T7927, iron multi-function pump control valve casting appearance quality reference JB / T7927's. 8. Housing strength Multifunctional pump control valve shell strength should be consistent with the provisions of GB / T13927. 9. Sealing performance Multifunctional pump control valve sealing performance should be consistent with the provisions of GB / T13927. 10. Cleanliness Multipurpose pump control valve cleanliness should be consistent with the provisions of JB / T7748. 11. Painting When applied to drinking water, multi-functional pump control valve cavity coating material safety should be consistent with the provisions of GB / T17219. Painting the outer surface is not specified, special requirements specified in the order contract.
Zirconia Ceramic Shaft
Anti-magnetic: Because the ceramic bearing is non-magnetic and does not absorb dust, it can reduce the early peeling of the bearing, noise, etc., and can be used in demagnetization equipment. Precision instruments and other fields.
Insulation Due to the high resistance of ceramic bearings, it can be protected from arc damage and can be used in various electrical equipment requiring insulation.
self-lubricating characteristics Because of the unique oil-free self-lubricating properties of ceramic bearing materials, in the ultra-high vacuum environment, it can overcome the problem that ordinary bearings can not achieve lubrication.
High-speed ceramic bearing has the advantages of cold resistance, small elasticity, high pressure resistance, poor thermal conductivity, light weight and small friction coefficient. It can be applied to high-speed spindles of 12000 rpm/-75000 rpm and other high speeds. In precision equipment;
Zirconia Ceramic Shaft,Resistance Zirconia Ceramic Rod,Zirconia Ceramic Piston Shaft,Ceramic Shaft
Dongguan Haikun New Material Co., Ltd. , https://www.nitrideceramic.com