(Abstract) Diamond superhard tools play an important role in stone processing. The annual output value of sawing tools accounts for 60%-70% of the total output value of superhard products. Its performance quality directly affects the quality, cost and stone of stone processing. Utilization of blocks. The sawing tools are mainly divided into granite saw blades and marble saw blades. Among them, marble has beautiful color and fine texture. It has been popular in the architectural decoration industry for more than ten years. It has a huge demand in the domestic market and consumes a large number of marble saw blades every year. .
In order to improve the yield of marble blocks, the marble sawing tools require small kerf width, high sharpness and good self-sharpness. Good sawing quality can reduce machining allowance, reduce loss and ultimately increase the yield. The marble saw blade bears huge impact load during the sawing process. The diamond particles, the carcass and the marble are strongly worn between each other. At present, the marble saw blades in China generally have the advantages of poor sharpness, low carcass strength and poor durability. problem. Studying the stability of the carcass, the synchronous wear and the good control of the diamond have practical engineering significance for the performance improvement of the marble saw blade.
The marble saw blade carcass usually uses a copper-tin formula system, which has strong bond strength, good wear resistance, low sintering temperature, and widely used copper-tin pre-alloyed powders such as CuSn10, CuSn15 and CuSn20. The copper-tin prealloyed powder forms α-solid solution and (α+δ) eutectoid during the sintering process, and the carcass is hard and brittle and not sticky, which has a certain improvement on the self-sharpness of the carcass. High tin prealloyed powder is easier to achieve liquid phase sintering during sintering, and can produce δ, ε brittle phase. Even when the tin mass fraction exceeds 40%, the carcass generates η hard and brittle phase, which can improve the diamond tool matrix synchronization or Leading wear and tear, it has a significant effect on sharpness.
At present, there are few studies on high tin prealloyed powders in China, especially for elemental reinforced copper tin prealloyed powders. Adding a small amount of silver to the copper-tin alloy makes it easy to adjust the solid phase line of the alloy liquid, improving mechanical properties and stability. In this study, a silver-based high-tin prealloyed powder was prepared by gas-water tight coupling atomization method, and the alloy powder was added to the formula to replace the elemental tin powder in the original formula, and the corresponding nuclear reduction copper powder was finally used for improvement. The carcass performance of marble saw blades is hopeful for the industry.
Disclaimer: The contents of this column are for technical communication purposes only!
Sealand is a professional supplier of Water Mass Flow Meter, Beverage Mass Flowmeter, Water Mass Flowmeter, Beverage Mass Flow Meter, Palm Oil Flow Meter, ATEX, IECEx & CE approved.
It has self-diagnosis function.
The transmitter & software will self-diagnose once powered on/ connected.
The transmitter will show error code immediately on the top of display if there is anything
wrong.
1.Error 01: Sensor error; 2.Error 02: Temp. sensor overrun;
3.Error 03: Zero failed; 4.Error 04: Transmitter initializing.
To callout the interface on software, click tool bar > Functions > Status. The light in front is
green when everything is fine, but will be red if there is any error.
Please keep the meter in good condition during transport, better packed in the original
package from the manufacturer.
Please make sure the site meets following requirements, if keep the meter in storage.
a) Waterproof and moisture-proof;
b) With few mechanical vibration and crush;
c) Temperature from -30°C to +65°C;
d) Humidity less than 80%, better about 50%;
e) Please clear up the sensor if storage used one;
f ) Performance will be influenced if storage in the open.
Water Mass Flow Meter, Beverage Mass Flowmeter, Water Mass Flowmeter, Beverage Mass Flow Meter, Palm Oil Flow Meter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com