Model NO.: CuNi2
Serves: Small Order Accepted
Sample: Sample Available
standard: GB/ASTM/JIS/BIS/DIN
Diameter: 0.02-10.0mm
Surface: Bright
Insulation: Enameled, PVC, PTFE etc.
Trademark: TANKII
Transport Package: Packing in Coil Cartons, Pallet, Spools, Coils
Specification: SGS
Origin: China
HS Code: 74082200
Model NO.: CuNi2
Serves: Small Order Accepted
Sample: Sample Available
standard: GB/ASTM/JIS/BIS/DIN
Diameter: 0.02-10.0mm
Surface: Bright
Insulation: Enameled, PVC, PTFE etc.
Trademark: TANKII
Transport Package: Packing in Coil Cartons, Pallet, Spools, Coils
Specification: SGS
Origin: China
HS Code: 74082200
CuNi2/Cuprothal 5/Copper Nickel Alloy WireAppicaton:
Low-voltage circuit breaker, thermal overload relay, electrical heating cable, electrical heating mats, snow melting cable and mats, ceiling radiant heating mats, Floor heating mats & Cables, Freeze protection cables, electrical heat tracers, PTFE heating cables, hose heaters, and other low-voltage electrical product
Â
| Characteristic | Resistivity ( 200C μΩ.m) | Max.working Temperature ( 0C) | Tensile Strength (Mpa) | Melting point (0C) | Density ( g/cm3) | TCR x10-6/ 0C (20~600 0C) | EMF vs Cu (μV/ 0C) (0~100 0C) |
| Alloy Nomenclature | |||||||
| NC005(CuNi2) | 0.05 | 200 | ≥220 | 1090 | 8.9 | <120 | -12 |
Chemical Content, %
| Ni | Mn | Fe | Si | Cu | Other | ROHS Directive | |||
| Cd | Pb | Hg | Cr | ||||||
| 2 | - | - | - | Bal | - | ND | ND | ND | ND |
Mechanical Properties
| Max Continuous Service Temp | 200ºC |
| Resisivity at 20ºC | 0.05±10%ohm mm2/m |
| Density | 8.9 g/cm3 |
| Thermal Conductivity | <120 |
| Melting Point | 1090ºC |
| Tensile Strength,N/mm2Â Â Annealed,Soft | 140~310 Mpa |
| Tensile Strength,N/mm2Â Â Cold Rolled | 280~620 Mpa |
| Elongation(anneal) | 25%(min) |
| Elongation(cold rolled) | 2%(min) |
| EMF vs Cu, μV/ºC (0~100ºC) | -12 |
| Micrographic Structure | austenite |
| Magnetic Property | Non |
 CuNi2/Cuprothal 5/Copper Nickel Alloy Wire
Appicaton:
Low-voltage circuit breaker, thermal overload relay, electrical heating cable, electrical heating mats, snow melting cable and mats, ceiling radiant heating mats, Floor heating mats & Cables, Freeze protection cables, electrical heat tracers, PTFE heating cables, hose heaters, and other low-voltage electrical product
Â
| Characteristic | Resistivity ( 200C μΩ.m) | Max.working Temperature ( 0C) | Tensile Strength (Mpa) | Melting point (0C) | Density ( g/cm3) | TCR x10-6/ 0C (20~600 0C) | EMF vs Cu (μV/ 0C) (0~100 0C) |
| Alloy Nomenclature | |||||||
| NC005(CuNi2) | 0.05 | 200 | ≥220 | 1090 | 8.9 | <120 | -12 |
Chemical Content, %
| Ni | Mn | Fe | Si | Cu | Other | ROHS Directive | |||
| Cd | Pb | Hg | Cr | ||||||
| 2 | - | - | - | Bal | - | ND | ND | ND | ND |
Mechanical Properties
| Max Continuous Service Temp | 200ºC |
| Resisivity at 20ºC | 0.05±10%ohm mm2/m |
| Density | 8.9 g/cm3 |
| Thermal Conductivity | <120 |
| Melting Point | 1090ºC |
| Tensile Strength,N/mm2Â Â Annealed,Soft | 140~310 Mpa |
| Tensile Strength,N/mm2Â Â Cold Rolled | 280~620 Mpa |
| Elongation(anneal) | 25%(min) |
| Elongation(cold rolled) | 2%(min) |
| EMF vs Cu, μV/ºC (0~100ºC) | -12 |
| Micrographic Structure | austenite |
| Magnetic Property | Non |
Â
Optic Crystal End Fittings for Fiber Optic Curtain come in many shapes and sizes, from cylinder to glass balls. Crystal Fiber Optic End Fixture, mainly for the fiber optic chandelier and curtain, are fitted on the naked and clear PVC sheathed Strands of End Lit Fiber.
Fiber optic crystal fittings may or may not be necessary depending on your application. But crystal end light fittings are ideal for chandeliers and special projects are ideal for museum lighting, cabinets, staircases and illuminating walls, among others.
Optic Crystal End Fittings,Fiber Optic End Fixtures,Fiber Optic End Fittings,Fibre Optic End Fittings
Jiangxi Daishing POF Co.,Ltd , https://www.opticfibrelight.com