Compared with Taiwan’s annual theft of 50,000 vehicles (only more than 200,000 new cars are sold each year), and the United States steals a car for an average of 20 seconds, China is currently stealing 
Stealing a car is not serious. This does not mean that the law and order in the country is good, and there are fewer thieves. It’s just that the domestic thief army, there will be few cars, not to mention stealing cars. Therefore, they can only steal manhole covers, iron bars, etc. before they can, and they have no ability to steal valuable cars. But this situation will not last long. When a large number of people in the country's thieves have mastered the technology of driving a car, then the phenomenon of car theft in China will be more than that of Taiwan or the United States. Don't think that losing a car is a matter for insurance companies. In fact, the wool is on the sheep. Therefore, there is a greater demand for products with high anti-theft performance on the market. We are still expecting that Chinese manufacturers can introduce newer and better car theft. At present, vehicle anti-theft products can be basically divided into three categories according to the technical principle: mechanical anti-theft device, electronic (electromechanical) anti-theft alarm device, networked anti-theft alarm (positioning, tracking) system. Mechanical anti-theft devices can be roughly divided into three types: steering wheel locks, gear locks and wheel locks. The steering wheel lock is probably the most used type of car anti-theft product. Mainly because the steering wheel lock does not need to change the car, the price is relatively easy, and the car thief has a certain deterrent effect. However, the steering wheel lock is in the mind of people, and it is an anti-theft product with poor anti-theft performance. From the current situation, this is indeed the case. Many steering wheel locks are known as anti-saw and anti-saw, but the steering wheel that it locks is not anti-saw and anti-scissor. The steering wheel is made of a small aluminum alloy tube in plastic. The thief can cut one or two gaps on the steering wheel in one to two minutes, and remove most of the domestically produced steering wheel locks from the gap. Throw it away. If a hydraulic shear or laser gun is used, it is said to be only 5 – 10 seconds. If an anti-theft device, thieves do not need any technology, only one to two minutes to lift, this anti-theft device can not say how much anti-theft effect. At present, the new products of the domestic steering wheel lock are limited to the use of new soft keys, various new folding methods, etc., and these improvements have not significantly improved the anti-theft performance of the steering wheel lock. However, in the work of improving the anti-theft performance of the steering wheel lock, Taiwan and the United Kingdom have always been ahead. Their products not only pay attention to the firmness and firmness of the lock body, but also protect the steering wheel, so that the car thief can not remove the steering wheel lock by sawing the steering wheel. For example, Taiwan's steel armor and Shuangan warrior steering wheel locks have double hooks at each end. The double hooks straddle the two ends of the connecting column. The double hooks have armor to protect the steering wheel. This type of four-hook armor type steering wheel lock has a greater anti-theft performance than the conventional double hook type. However, since the armor is flat on the steering wheel, the car thief can still cut the steering wheel lock from below to cut the steering wheel. There are also manufacturers in China that produce four-hook armor-style steering wheel locks, which may promote poor introduction, and are not very convenient to use, and the popularity is very low. The full-cover or half-hood steering wheel locks introduced in the UK also have high anti-theft performance. This type of steering wheel lock covers the entire or most of the steering wheel so that the car thief cannot destroy the steering wheel. But such steering wheels are expensive. Moreover, it is still possible to use a special cooker to deform the steering wheel and remove the full-cover or half-cover steering wheel lock. In order to improve the anti-theft performance of the steering wheel lock, many Taiwanese manufacturers have integrated electronic burglar alarms into the steering wheel lock. For example, Taiwan’s God’s eye pressure communication lock and Jingnai lock. This type of electronic alarm steering wheel lock is much better than the pure electronic burglar alarm sold in China. Because most of the pure electronic burglar alarms only sound an alarm, and can not prevent the car thief to drive away. Moreover, the pure electronic burglar alarm requires the installer to install it on the car, the installer is incomplete, and the quality is difficult to guarantee. The electronic alarm steering wheel lock does not need to be installed, and can prevent the car thief from driving away. In addition to the expensive price, the shortcoming of the electronic alarm steering wheel lock is that when the battery is low or has no power, its alarm function is greatly reduced or invalid. The good news is that China has taken the lead in innovation and design of steering wheel locks. Recently, Guangzhou No. 1 Company introduced a very novel and unique steering wheel lock – armored car anti-theft lock. Its locking principle is completely different from other steering wheel locks. Its U-shaped armor three bread covers the steering wheel of the relevant part, and it cannot be sawed, cut, or smashed in any direction to cover the steering wheel. If you can't destroy the part of the steering wheel, armored car anti-theft It is impossible to remove the lock from the steering wheel. Moreover, when the armored car anti-theft lock is locked to the steering wheel, the horn is pressed on the steering wheel. If you unlock or destroy the lock by an abnormal method, you will touch the horn and press the disc to make a sound. Moreover, the armor of the armored car anti-theft lock covers the fragile lock core, making it impossible for the car thief to destroy the lock cylinder by violent methods such as drilling, smashing and knocking. The eccentric crescent-shaped lock cylinder is used to prevent the universal key and strong twist. Therefore, the anti-theft performance of the armored car anti-theft lock is extremely high. Although the anti-theft performance of other types of anti-theft systems or devices may be wrong, but the car thief did not know before entering the car, drilling and knocking inside, making the car look completely unrecognizable. The steering wheel lock is placed in the most conspicuous place in the car. When the car thief sees it, he will find it difficult to retreat and choose other easy-to-start targets. Therefore, the steering wheel lock with high anti-theft performance is irreplaceable for the deterrent effect of the car thief. Compared with Taiwan’s annual theft of 50,000 vehicles (only more than 200,000 new cars are sold each year), and the United States steals a car for an average of 20 seconds, the current domestic theft is not serious. This does not mean that the law and order in the country is good, and there are fewer thieves. It’s just that there are few drivers in the domestic thief army, not to mention stealing cars. Therefore, they can only steal manhole covers, iron bars, etc. before they can, and they have no ability to steal valuable cars. But this situation will not last long. When a large number of people in the country's thieves have mastered the technology of driving a car, then the phenomenon of car theft in China will be more than that of Taiwan or the United States. Don't think that losing a car is a matter for insurance companies. In fact, the wool is all on the sheep. Therefore, there is a greater demand for products with high anti-theft performance on the market. We still expect that Chinese manufacturers can introduce newer and better car anti-theft locks.
square to plate lock
square to plate lock
Ball Valve,Mini Ball Valve,Two Way Mini Ball Valve,Stainless Steel Ball Valve
Ningbo Wenhan Fluid Equipments Co., Ltd. , https://www.wenhanvalves.com