â—† When transporting furniture and equipment, cushioning padding should be added to the transportation route, and it is not allowed to be directly pulled on the floor.
â—†To prevent scratching the ground, do not wear shoes with nails to walk on the ground. If possible, replace the soft shoes with shoes.
â—† Place cushions between the furniture and equipment feet and the floor. The cushion size is slightly larger than the base size.
â—†When the plastic floor is cleaned, it should be mild neutral detergent and warm water. Do not use strong acid or alkali to clean the floor. Care must be taken when treating floors with organic solvents.
â—† Always pay attention to avoid hard or sharp appliances, drop on the floor and avoid damage to the floor.
â—†The chewing gum stain adhered to the floor can be wrapped in plastic bags, frozen into ice cubes in the refrigerator, and then placed on the chewing gum, so that it cools and hardens, and then carefully scraped off.
â—† In order to reduce the wear of the plastic floor surface, extend the service life of the floor, and keep the floor clean and beautiful, it needs to be thoroughly cleaned, waxed and maintained regularly. Usually once in January-February.
◆Plastic floor, can not directly contact the heat source, should not place high temperature items above 60 °C on the floor, such as electric kettle. The cigarettes that are randomly discarded, if not completely extinguished, will leave marks of burns on the floor.
â—†Plastic floor should be sprayed with ink, oil, etc., and should be disposed of in time. Washing powder and soapy water can be used for daily cleaning to remove stains. If you encounter smudges that are difficult to remove, do not use scouring to polish them. You need to find a professional to deal with them in time to remove the pollution.
Smd Led Lamp Beads,Led Chip Yellow Lamp Beads,Strip Led Bead,Orange Light Lamp Beads
Shenzhen Huangtai Photoelectric Co.,Ltd. , https://www.huangtailightstrip.com