Model NO.: ELECTRON
Body Material: PA66
Accessories: Brush, Nozzle, Silicone Roller
Printing: Can Be Your Logo
Warrange: 12 Months Except Ceramic Heating Element
Trademark: HEATFOUNDER
Transport Package: Carton Box or Tool Box
Specification: 1.8kg
Origin: China
Model NO.: ELECTRON
Body Material: PA66
Accessories: Brush, Nozzle, Silicone Roller
Printing: Can Be Your Logo
Warrange: 12 Months Except Ceramic Heating Element
Trademark: HEATFOUNDER
Transport Package: Carton Box or Tool Box
Specification: 1.8kg
Origin: China
Hot air welding machine pvc fabricÂ
| Hot air welder | ||||
| Temperature controll | We use photocell to controll temperature inside. | |||
| Temperature switch | Outside of the gun there is temperature switch. And once the plastic body is above 135 degree,the whole circuit will be cut off. |
|||
| Plastic material | At present,this plastic is one can resist the highest temperature. It can resist 280 degree. |
|||
| Bearing | We use high temperature bearing manufactured in Japan. | |||
| Ceramic heating element | We use Swedish heating wire for ceramic heating element inside the hot air gun. And ceramic material is also good quality. It can resist high temperature 1650C. |
|||
TECHNICAL DATA:
| ZX1600 | ZX3400 | 1.Power cord |
| Voltage(V) :42 100 120 200 230 For 50/60Hz | Voltage(V) :200 230 For 50/60Hz | 2.Main switch 3.Screw on the clamp |
| Power consumption(W) :960 1400 1600 | Power consumption(W) :3400 | 4.Potentionmeter for temperature adjustment |
| Weight (kg) :1.3 with 3m cord | Weight (kg) :1.4 with 3m cord | 5.Handle & Nozzle |
| Temerature :20-700 degrees Celsius,infinitely controlled | 6.Air fillter | |
| Air flow (1/min) :Max.230 | 7.Rubber stand | |
| Air pressure (pa) :3000 (30mbar)after about 24 h operating time | 8.Adapter tube | |
| Size (mm):Customized | 9.Heat protection tube | |
APPLICATION:
Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards,tubes profiles,lining membranes,coated materials,films,foams,tiles and sheets.The following procedures are possible :Overlap welding ,welding with rod,with tape,butt welding and melt welding.
Heating - up for forming,bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves,films,tapes,solder sleeves,pre formd and moulded parts.
Soldering of copper pipes,solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings,paper,coal or straw in furnaces.
Detailed pictures:
Hot air welding machine pvc fabricÂ
| Hot air welder | ||||
| Temperature controll | We use photocell to controll temperature inside. | |||
| Temperature switch | Outside of the gun there is temperature switch. And once the plastic body is above 135 degree,the whole circuit will be cut off. |
|||
| Plastic material | At present,this plastic is one can resist the highest temperature. It can resist 280 degree. |
|||
| Bearing | We use high temperature bearing manufactured in Japan. | |||
| Ceramic heating element | We use Swedish heating wire for ceramic heating element inside the hot air gun. And ceramic material is also good quality. It can resist high temperature 1650C. |
|||
TECHNICAL DATA:
| ZX1600 | ZX3400 | 1.Power cord |
| Voltage(V) :42 100 120 200 230 For 50/60Hz | Voltage(V) :200 230 For 50/60Hz | 2.Main switch 3.Screw on the clamp |
| Power consumption(W) :960 1400 1600 | Power consumption(W) :3400 | 4.Potentionmeter for temperature adjustment |
| Weight (kg) :1.3 with 3m cord | Weight (kg) :1.4 with 3m cord | 5.Handle & Nozzle |
| Temerature :20-700 degrees Celsius,infinitely controlled | 6.Air fillter | |
| Air flow (1/min) :Max.230 | 7.Rubber stand | |
| Air pressure (pa) :3000 (30mbar)after about 24 h operating time | 8.Adapter tube | |
| Size (mm):Customized | 9.Heat protection tube | |
APPLICATION:
Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards,tubes profiles,lining membranes,coated materials,films,foams,tiles and sheets.The following procedures are possible :Overlap welding ,welding with rod,with tape,butt welding and melt welding.
Heating - up for forming,bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves,films,tapes,solder sleeves,pre formd and moulded parts.
Soldering of copper pipes,solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings,paper,coal or straw in furnaces.
Detailed pictures:
Zinc Toilet Spray
Inner packing:Bubble bag,color box,blister packing or according to customers' special packaging requirement.
Outer packing:Packed in standard export carton.
| 1. Name | Toilet High Pressure Chromed Plastic Bidet Hand Spray,Shattaf |
| 2. Model No. | sanyin |
| 3. Material |
Shattaf: ABS+Zinc Head Hose: Stainless steel pipe, with pvc inner tube,brass or zinc nut |
| 4. Insert | Brass or Plastic |
| 5. Color | Chrome, Various color can be chosen |
| 6. Water Pressure | 5-7 KGS |
| 7. Working Temperature | Less Than 80°C |
| 8. Size of Thread | 1/2 |
| 9. Functions | 1 Function |
| 10. MOQ | 1000 pcs |
| 11. Fitting for Choose | Shower Hose, shower holder,Diverter(Angle Valve & T-adapt)...... |
| 12. Package | Bulk with bubble bag, color box & blister card & polybag with card & blister with card... |
| 13. Feature | Connect with shower hose,hanging by shower holder , Good water outlet Bidet Hand Spray ,Durable use ,easy to install |
| 14. Type | Bidet Hand Spray,Shattaf |
| 15. Delivery time | Within 25-30days after receiving deposit |
| 16. OEM,ODM | OK,Welcome |
| 17. Payment term | T/T * ,L/C, MoneyGram, Western Union... |
Zinc Shattaf Bidet Spray,Zinc Shattaf Bidet Hand Spray,Zinc Alloy Shattaf Bidet Spray,Shattaf Toilet Bidet Spray
Yuyao Sanyin Sanitation Factory , http://www.chinasanyin.com