Bathrooms account for the vast majority of daily household water consumption, and the choice of water-saving sanitary ware allows us to consciously save a lot of valuable water during daily use. The quality of sanitary equipment also plays an important role in the comfort of living, and the use of a variety of new technologies in sanitary equipment has created a brand new modern bathroom space.
Cano tile   Carrie bathroom
Water-saving toilet
Keywords: Reuse, boost pressure Some sanitary ware manufacturers have greatly improved the utilization rate of water through unique product design, and have made the water-saving ability of toilets a new level.
It's a shame that flushing toilet bowls with pure tap water is inevitable. Some sanitary ware manufacturers then installed hand-washing faucets and built-in small hand-wash basins on the toilet tanks. Users can wash their hands after each convenience, and the sewage flows into the water tank for storage for the next flush. For the use of toilets, this type of toilet is a secondary use of sewage, and the achievements in water saving are obvious.
In order to increase the flushing effect of toilets on the premise of reducing the amount of flushing, some manufacturers have added pressure boosting systems to the toilets. Whether they are flush or siphonic toilets, they all belong to the category of gravity-type sanitary ware. Gravity flushes. In contrast, the assisted pressure mode of operation is relatively novel. Water flows into the water inlet system and compresses the air trapped in the tank. When the toilet flushes, compressed air causes the water to be ejected from the tank at high speed. The potty of the toilet is specially designed to absorb this water flow. The entire washing process is preached for four seconds. The accelerating force generated when the water is sprayed can easily push the dirt in the bedpan out of the drainage pipe. Therefore, many techniques are used to assist the flushing of water. The toilet can be flushed with only 4 liters of water, which is less than the 6 litres required by the government.
Water saving faucet
Keywords: faucet stabilizers, thermostats at the outlet of the faucet The installation of a stabilizer is also an effective water saving method. The faucet stabilizer is usually made of a metal mesh cover (partly plastic), and when the water passes through the mesh cover, it is cut into a large number of tiny water columns with air entrained in it. Due to the air injection and pressure, the leading water beam equipped with the flow regulator is larger than the traditional leader, the flow feels smooth, and the water conservation is greatly saved while ensuring the degree of cleanliness.
According to tests, a faucet with a steady flow regulator saves more than 70% of water consumption than a faucet without a flow stabilizer.
Showers and bath mixers with hot and cold water have to re-adjust the water temperature before each release of water, which inevitably wastes a lot of water. If you configure the thermostatic faucet for the shower and bathtub, this problem will be solved. When the water temperature changes, the thermostat will automatically adjust the balance of hot and cold water, keep the water temperature constant, thus avoiding re-warming and wasting a lot of water.
Water saving shower
Keywords: air/water flow mixing technology Some high-end brand showers currently on the market have a similar design. They inhale a lot of air through the small holes on the shower spray surface. The air is combined with water in the interior of the shower to generate Mixed with numerous bubbles of water flow, and then even out from the shower hole, forming a large and soft water droplets. The air and water flow can be mixed in different proportions. The mixing ratio can be up to 5:1, that is, 5 liters of air is mixed with 1 litre of water. It is estimated that the same washing effect can be achieved, and showers using air/water flow mixing technology can save up to 10% more water than traditional showers.
Water-saving bathtub
Keywords: Considering both water consumption and comfort For households pursuing water-saving effects, when choosing a bathtub, consumers should not only choose the size of the bathtub based on the size of the bathroom, but should choose a balance based on the actual conditions of the user. Bathtub with water consumption and comfort.
Some sanitary ware manufacturers launched a water-saving bathtub in due course, relying mainly on long-width-height dimensions to adjust the volumetric capacity to achieve water savings. The length of the water-saving bathtub is generally 1.5 meters (about the length of an adult's seat), and the depth is often deeper than the ordinary bathtub, between 50 cm and 70 cm. In addition, the design of the water-saving bathtub meets the human body posture function line, so as not to cause a large amount of water loss to achieve water saving purposes. It saves about 20% more water than an ordinary bathtub, but it also makes bathers feel comfortable. This type of bathtub is especially suitable for the elderly and children because of its small size and easier to stand than normal bathtubs.
Sanitary Ware Buy Bathtub Faucet Space Toilet Design Bathroom Tiles Bathroom Wash Basin Bathroom Size Top Tiles
Foshan Yichu electronic lighting Co., LTD , https://www.eonelights.com