Statistics on the production and application of parts and bearings of China Powder Machinery Metallurgy Professional Association and Japan Powder Metallurgy Machinery in the past three years

The China Machine Tool Association of Powder Metallurgy (CMPMA) has been in friendly contact with the Japan Powder Metallurgical Industry Association (JPMA). Regularly exchange statistics on economic operations of the industry and exchange relevant information every year. For the comparability of statistical data, the data provided by CMPMA to JPMA has been 34 statistical member units, and the data included in the CMPMA table is only 34 statistical member units. The statistics of the two associations are published as follows, for the reader's reference only.

Panel Light

We supply various panel light, including surface mounted panel light LED, recessed ceiling light, slim panel light etc.

The below information will help you to know more about panel light.

What is a panel light?

Panel lights are used residentially and commercially and replace traditional fluorescent ceiling lights. They can be mounted on various types of surfaces, including recessed ceilings or suspended grid ceilings. Because they are smooth, they provide a flat wall of light without noticeable bulbs

Types of LED Panel Lights

Commonly, they are available in two categories: surface-mounted and recessed ones.

Surface-mounted LEDs – The surface-mounted ones appear to be thicker than the recessed ones as they are structured to match broader surfaces. There is no requirement of cutting the mounting hole as it is attached to the bracket by screwing it.

Recessed LEDs – They are the slimmest ones available in the market. They are framed to fit in the mounting surface. A cutout hole is required in the mounting surface to fit them with side springs that hold them.

Where to Use Panels?

LED panels can be the most eligible substitute for the prevailing illuminator setup, saving power consumption. Many houses still have pennant or flush illuminators or downlights that can be refurbished using them to get a new trendy look.

The flexibility of LEDs is that they can be used anywhere without any hindrance. They are much brighter and give you more clear brightness. You can install these in your hall, kitchen, bathroom, and living room.

In case you have a plan to renovate your house`s illuminating system, you can choose these instead of ordinary bulbs and tubes. Generally, the mounting surface determines the type of light you may use. Recessed ones can be used over plasterboards and plywood or on thin MDF as they can be cut effortlessly for making a hole.

As brick and timber cannot be reduced to make a hole, you can use surface-mounted ones over here. Brackets are accommodated into which they are screwed easily.

Panel Light ,Indoor Panel Light ,Inside Led Panel Light,Smart Led Panel Light

NINGBO LONGFLIGHT INTELLIGENT TECHNOLOGY CO.,LTD , https://www.long-flight.com