Smart wire rope slot

In the process of using the electric hoist, it is often the case that the wire rope is pulled out of the cavity of the drum into the cavity on both sides of the drum. After this happens, it takes a few hours to draw the wire rope, and this situation will occur repeatedly. After many analyses, it was found that the gap between the drum and the drum casing was too large. To this end, we take the method of repairing the steel ring 4 (see figure) on both sides of the drum to keep the unilateral clearance at

Steel Mills Roller Bearing

Rolling Mill Bearing for blanking machine .
Rolling mill bearings are the bearings used on the roll necks and rollers of metallurgical, mining and other rolling mill stands. Cylindrical roller bearings are often used to withstand radial loads, deep groove ball bearings or angular contact ball bearings, or radial design or thrust design Tapered Roller Bearings to withstand axial loads. Most of them are lubricated and cooled by means of oil-air lubrication or oil mist lubrication.
Rolling Mill Main Application:
Cold rolling mill, Hot rolling mill, Blanking machine

Roll neck and drum for metallurgy, mining and other rolling mill stands

Fcd Rolling Mill Bearing,Fcd Rolling Bearing,Bearing For Steel,Bearing For Steel Mill

Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearings.com