For modern people, the design of personalization and convenience is more sought after, so the style of shoe cabinets is becoming more and more abundant. A good shoe not only has a powerful practical function, but also can dress up the entrance more refined, people first fell in love with your home. However, the different styles of the shoe cabinet will lead to a gap in the size of the shoe cabinet, and the placement of the shoe cabinet will also affect the decoration of the entrance. The following Xiao Bian took everyone to understand the issue of shoe design and placement.
What are the shoe design considerations?
1. Depth is 35 to 40 centimeters
Shoe cabinet design need to pay attention to its depth, although men and women shoes are different, but the specifications generally do not exceed 30cm, so the depth difference in the shoe cabinet is good 35 to 40 centimeters is good, if you want to shoe box is also incorporated into the shoes In the case of cabinets, the depth would require 38-40 centimeters. Before designing, it should be measured based on the size of the shoe box of the family and the family.
2. According to the use of frequency classification
Before the layout, you should learn about the door-to-door movement. If you can focus on the best, if you have a limited range, you can use a partition. Put the shoes that you usually wear on the shoes, and you can get it near the line of shoes. Others The shoes can be placed in the dressing room or other areas. In terms of moving lines, the shoe cabinet is designed to have the best position at the entrance, and can be worn on and off once you enter the door.
3, shoe cabinet height should be higher than the shoe height
The normal height of the shoes are all under 15cm, so the height of each layer of the shoe cabinet design should not exceed 20cm. If the shoes are high-heeled shoes or high-heeled shoes, you need to design different high-function partitions for storage. The design height is very important.
Entrance shoes display 3 tips
1. For women, the shoes of the same season will have a variety of styles. The shoes for each quarter must be no less than ten pairs, and they are like to be placed in the bedroom so that it is easy to go out before going out with a clothing bag. With collocation, in fact, the shoes are only suitable to be placed near the gate, and other places in the house, including the bedroom, will be detrimental to feng shui.
2. Shoes used on the street are often stained with various kinds of breath, resulting in a cluttered air field. Therefore, these shoes should be placed near the gates that often go in and out. If they are put in disorder, bad air outside will follow the shoes. Into the house, affecting the fortune and feng shui. Therefore, it is advisable to add a closed shoe to the room so that a bad magnetic field cannot be easily released.
3. Shoe cabinets should be placed on the right side of the entrance. This is not only because it is the right hand to compare people's dominant hand, it is in line with ergonomic standards, and it can bring good luck to Feng Shui.
Editor's Note: The above is about the shoe cabinet design considerations and what are the three major tips for the entrance cabinet display, I hope the Xiaobian share helps everyone. For more information, you can continue to pay attention to this site.
Shoe cabinet design
Screws are threaded fasteners that create permanent or temporary assemblies. They are inserted and removed by turning in one direction or another. Wood screws, floor screws, and sheet metal screws have flat heads that sit flush when holding material together. Machine screws fasten metal to metal and are inserted into a prethreaded hole or mated with a nut. Thread-cutting screws are self-tapping screws that cut away and remove the surrounding material to create a tapped hole. Deck screws resist rust and corrosion to hold outdoor decking materials together. Drywall screws have fine tips, coarse threads, and tapered bugle heads to penetrate drywall and grip wood without damaging material. Hex-head bolts, cap screws, and lag screws are driven with wrenches rather than screwdrivers or drill bits. Captive panel screws and thumb screws can be tightened and loosened without tools on parts that are frequently removed such as access panels. Screw caps can help to cover screw heads for both safety and aesthetic purp
Carbon Steel Screw,Carbon Steel Screws Outside,Carbon Steel Screw For Sale,Carbon Steel Self Drilling Screws
Taizhou TS HARDWARE Co., Ltd , https://www.shuwengroup.com