It is difficult to get rid of these 4 tiles!

Under normal circumstances, the bathroom and the kitchen are the most humid places in the home. Therefore, not only the ground must be tiled, but also the wall must be affixed. Many times, the home will inevitably encounter such a phenomenon, a large number of tiles off, serious impact Not to mention the beauty of homes, but also affect the daily life, then why the tiles fall off? How to avoid?

First, carefully clean up the grass-roots level

The grassroots cleanup is to better tile the tiles and is the first step in making the tiles more secure. The dirt on the wall floor is cleared away, and the cement mortar when laying the tiles can better bond the ceramic tile to the wall surface. If there is cracking on the wall of the bathroom wall, it must be properly handled to tile the tiles, otherwise not only will it cause cracking of the tile in the future, but also make the waterproofing of the bathroom a big problem.

Second, the base level is full of water

When using cement mortar to bond tiles, it is important to ensure that the tiles are full of mud, as well as the moisture level at the base level. Before the tile is laid, the base layer should be fully watered, especially on the wall surface, and sprinkled with water and moistened in advance for a certain period of time so as to avoid the cement mortar moisture being absorbed by the dry base layer and affecting the bonding strength.

Third, level the ground and then spread the brick

The ground of the bathroom space should be leveled first. It can be leveled with cement mortar and then tiled. However, the bathroom is not the same as other spaces. The bathroom needs to have a drainage design, that is, to find the slope according to the drainage direction. When the tile is tiled, the drainage position is low. This design prevents space water accumulation. On the one hand, it can be used after the bathroom is put into use. Keep the bathroom space dry from time to time, on the other hand, it also helps maintain the tiles.

Fourth, the tiles must soak

One of the reasons why tiles are soaked in water is that they have a certain rate of water absorption. In particular, the wall tiles have a high water absorption rate. After soaking in water, they can avoid the sewage that they absorbed the cement slurry when they were laying. Another reason is that water bubbles can make Tiles have a stronger bond. Therefore, it is recommended that before the bathroom is tiled, the tiles should be treated with water soaked in the tiles.

Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).

Tile tile paving tile maintenance

LED Solar Light

Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlighting.com