I think everyone should know what the door suction is. It can reduce the impact of the door and the wall. It has the function of protecting the door. At the same time, it also reduces the damage to the wall. But if there is a problem with the door suction, we need to disassemble it. What should we do? That? In fact, not only disassembly, but also the installation is also a lot of people do not understand, the following small series of decoration home network to introduce to you, how to install the door and how to install the door suction.
First, how to remove the door
1. We first use the iron piece with the special removal handle attached to the ball lock fitting and insert it into the small hole under the grip.
2. Follow the previous steps to easily unscrew the grip.
3. Use a one-word screwdriver to pick up the rear gasket of the grip.
4. Then use a cross screwdriver or electric screwdriver to loosen the set screw in the ball lock.
5. Remove the old ball lock from the other side of the ball lock.
6. Use an electric screwdriver or a cross screwdriver to remove the lock.
7. Remove the new ball lock assembly grip in the same way.
8. Finally, you can install the lock again.
Second, the door suction installation method
1. First of all, the placement method of such objects should be clarified, for example, on the ground or on the wall. Then determine the maximum position of the door to open. Test whether the door suction is reasonable. After the positioning is normal, open the door and try the actual one. Whether the operation is reasonable, finally determine the location and mark it.
2. Test and determine the position of the doorknob. Open the door to the maximum position, initially determine the position of the door suction, open the door, adjust the door suction position, and use the up and down and left and right fine adjustment methods until the appropriate position and angle are reached. In the final test, open the door to the maximum and determine its position.
3. The fixed door is sucked on the ground. Use a small internal angle to tighten the screw, and then confirm the position, punching, and assembly procedures. Next, install the fixed end on the ground. Use the attached internal angle tool to tighten the screw on the fixed end. The door is automatically installed. All right.
4. After doing the above work, you can start the electric drill operation, drill the hole with the relevant tools in the required area, fix the fixed end of the door suction, tighten the screw, and then screw it to the ground with a wrench or On the wall, the door is automatically installed.
Door suction is an indispensable tool for a family. Don't look at it is very small, but its role is very large. So how do you install the door knocker and how to install it? I think everyone can introduce it through Xiaobian. Understand, if you still want to know more about decoration, please continue to pay attention to the decoration home Internet cafe.
More related wonderful reading:
How much is the door? How to remove the door suction? What are the door suction materials?
We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Magnetic Spotlight,Magnetic Track Spotlight,Magnetic Track Led Spotlight,Magnetic Double Head Light
Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlight.com