How to protect the water pump bearing

Source: Bearing network time: 2017-11-21

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

(1) The pump that is newly put into use; usually it needs to replace the smooth grease (oil) after 100 hours of operation; it will be replaced once every 500 hours in the future.
(2) Select smooth bearing with smooth grease; after 1500 hours of operation; replace the smooth grease; the amount of oil added may not be too much or too little; too much or too little smooth grease will cause the bearing to heat; the amount of fuel is usually grasped 1/2 to 2/3 of the bearing chamber volume is appropriate.
(3) Regarding the selection of smooth oil smooth bearings; the amount of oil should be added to the regular orientation.
(4) Containers containing smooth oil or smooth grease should be clean; usually should be sealed; there should be no dust, iron filings, etc.; avoid damage to bearings (5) Motor bearings usually use sodium-based smooth grease; It is characterized by high temperature (125 Â° C); but it is easy to dissolve in water; so it can not be used for the smoothness of water pump bearings.

Recommend to friends comments close window

Bearing related knowledge

The bearing direction and characteristics of the joint bearing ensure the bearing life and the conditions of feasibility
The work of NSK bearing view the application of rolling mill bearing plastic in rolling bearing (1)

This article links to http://
Please indicate China Bearing Network http://

Previous:Product Analysis: Solid Needle Roller Bearings Next: Analysis of the Effect of Bearing Smoothness

Antimony Trioxide Masterbatch

Flame Retardant Material,White Antimony Trioxide Masterbatch,Antimony Trioxide Masterbatch Cas,Antimony Trioxide Masterbatch

HUNAN ZHONGNAN ANTIMONY&TUNGSTEN TRADING CO.,LTD , https://www.znat.com.cn