Kitchen and bathroom decoration is the focus of renovation, ceiling is essential, then you know how to check and acceptance of the installation results of integrated ceiling?
Name family integrated ceiling
Angle line installation visual level
First of all, we have to check whether the visual installation of the corner line is good. We need to make a 90-degree angle without gaps and no obvious distortion. Then look at the overall flatness of the gussets and whether the gaps between the gussets are good visually.
Screw strength
The next check is the strength of the screw. We can remove a few gussets, check whether the distance between the screw rods meets the installation standards, and then pull a few screws under the appropriate tension to confirm if there is looseness.
Electrical installation number
Then check the number of appliances installed firmly. We can try to push the electrical body with the normal force by hand to see if the electrical appliance will fall off the triangular keel.
Electrical function
The last thing to test is whether the electrical function is functioning properly. We can turn on the switch and observe whether the electrical appliance is working properly; whether the ventilation and heating modules are in a reasonable position; when the ventilation or air warming module is turned on, the sound is normal and there must be no obvious noise.
Construction acceptance aisle ceiling living room ceiling electrical switch kitchen ceiling
Gate Valve,Sluice Valve,Knife Gate Valve,Slide Gate Valve
LIANGGONG VALVE GROUP CO.,LTD , https://www.lgvalvegroup.com