Bio-potassium fertilizer is a new type of stimulation agent, namely silicate fungicide. The production practice in some areas over the past few years has shown that the application of biological potassium fertilizer must pay attention to the key application techniques under certain environmental conditions, in order to exert a good yield increase effect.
Pay attention to soil conditions. The application of biological potassium fertilizer on loamy soil rich in organic matter, alkali nitrogen and available phosphorus is good. The soil that is too thin and the soil with poor water retention and fertility is not suitable for application. The soil available potassium content is less than 100 g/m3. Potassium soil application has the best effect on yield increase.
Pay attention to the water conservancy conditions. In irrigated land with irrigation conditions, the application of biological potassium fertilizer increased the yield significantly.
It should be applied preferentially to the upper and lower sorghum, and to the potassium crop.
When storing and applying biological potassium fertilizer, it should not be exposed to sunlight. Seed dressing should be carried out indoors or in a shed.
The biological potassium fertilizer can be used for topdressing and can be mixed with chemical fertilizers such as urea, ammonium sulfate, potassium sulfate and potassium chloride. However, it should be mixed and used, it should not be stored, and should not be mixed with alkaline substances such as grass ash.
Pay attention to early application. According to the test, the application effect is better when the foundation is applied, seed dressing, rooting and transplanting. If it is top dressing, it should be chased early in the seedling stage; on the contrary, the later the application, the worse the effect.
To apply near, it is necessary to apply the biological potassium fertilizer around the roots, the closer the better.
It is necessary to pay attention to the application, so that it is beneficial to the full play of the microbial crops.
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
The SKF bearing catalogue lists a large range of designs, variants and sizes of deep groove ball bearings. Beyond our catalogue offering, the SKF Explorer deep groove ball bearings are customizable to offer advantages for applications with specific performance needs.
SKF Deep Groove Ball Bearing,Ball Bearings for Motor，SKF Deep Groove Ball Bearing,SKF Ball Bearing
Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.lsjgbearing.com