Even if the frequency of cooking at home is not high, the use of faucets and sinks in the kitchen is not low. Therefore, compared to other accessories, cabinet faucets and sinks wear more. Therefore, when you choose the faucet and the sink, you need to know some tips, not only save energy and water, but also make the faucet and sink that you buy home longer.
Buying faucets: quality and energy efficiency are equally important
The kitchen is a big battle for home water consumption. In particular, more and more people are now worried about pesticide residues. Both vegetables and fruits should be soaked several times before they can be eaten. This leads to an increase in kitchen water consumption. Therefore, water saving is a problem that has to be considered when purchasing kitchen faucets. In addition to ordinary faucets, there are special water-saving faucets on the market, which are about 30%-40% less than ordinary faucets. The water-saving faucet is mainly installed with a bubbler in the faucet to inject air into the water, so that when the water is flushed, the water flow is reduced, the flushing amount is reduced, and the energy is saved. This kind of faucet also has the function of splashing, avoiding the problem of splashing water every time.
Another key factor in choosing a kitchen faucet is the problem of water leakage. Due to the high frequency of opening and closing of the kitchen faucet, if the quality is too poor, it will be easy to leak and drip after use, resulting in waste. The key to the leakage of the faucet is the valve core. It is generally considered that the ceramic valve core is the more advanced valve core technology. Compared with the ordinary valve core, it has the functions of strong wear resistance and good sealing performance, and its water leakage resistance is also better. It is recommended to choose the ceramic valve core faucet. In addition, when purchasing a faucet, you should also try to see if the opening and closing of the switch is smooth. See if the plating on the surface of the faucet is smooth or not. These are the key factors for judging whether the faucet is good or bad.
Optional sink: the design of the outlet is very important
At present, most kitchen sinks are made of 304 stainless steel. The basin is sturdy and durable, so there is no need to worry about the service life. The key is the water supply device of the sink. Many households habitually wash vegetables and wash dishes, and let the residue directly flow out from the water outlet of the water tank. The long-term cultivation of this habit can easily lead to blockage of the water outlet, water leakage of the water pipe, and smell of the sewer.
Therefore, consider the design of the water outlet of the sink when purchasing the sink. For example, a solid waste storage basket with a sinking sink can be selected, which can store the solid waste that is washed down, and the garbage of the storage basket can be emptied after each use of the water tank, thereby avoiding excessive solid waste entering the sewer and causing blockage. Nowadays, more and more families are installing food waste disposers, which can directly break solid waste, even if it is washed from the water pipe, it will not cause blockage.
In addition, the quality of the water pipes in the sewers is also a major concern when purchasing the sinks. If the quality of the water pipe is too poor, the corrosion of long-term food residue will easily lead to problems such as water leakage and odor. Therefore, pay attention to the quality of the product when selecting the sewer PVC water pipe.
The above faucet and sink selection techniques must be kept in mind, it is best to choose a regular store and brand when buying.
Concerned about surprises
Label: Cabinet accessories purchase: faucet selection water-saving sink to see the nozzle
Previous: How to protect the door lock? Next: Introduction to the correct purchase method of hardware accessories
1.cylindrical milling cutter
Used for processing flat surfaces on horizontal milling machines. Cutter teeth are distributed on the circumference of the milling cutter, and are divided into straight teeth and spiral teeth according to tooth shape. According to the number of teeth and coarse teeth and two kinds of fine teeth. The helical tooth rough tooth milling cutter has fewer teeth, high tooth strength and large chip space, which is suitable for rough machining. Fine-tooth milling cutters are suitable for finishing.
2. face milling cutter
Also known as disc milling cutter, used for vertical milling machine, end milling machine or gantry milling machine processing plane, end face and circumference have cutter teeth, also have coarse teeth and fine teeth. The structure has three kinds: integral type, insert type and transferable type.
3. End milling cutter
Used for processing grooves and step surface, knife teeth in the circumference and end face, can not work along the axial feed. When the end mill has end teeth through the center, axial feed can be provided.
4. Three-side edge milling cutter
Used for processing all kinds of grooves and steps, its two sides and circumference are provided with cutter teeth.
5. Angle milling cutter
For milling grooves at a certain Angle, there are two kinds of single Angle and double Angle milling cutters.
6.Saw Blade milling cutter
Used for machining deep grooves and cutting off workpieces, there are more cutter teeth on the circumference. In order to reduce the friction during milling, there are 15 '~1° auxiliary Angle on both sides of the cutter teeth. In addition, there are keyway milling cutters, dovetail slot milling cutters, T - shaped slot milling cutters and various forms of milling cutters.
End Mill,Roughing End Mill,Carbide Square Drill Bit,Coating Machine Tools
Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com