UHB-ZK mortar pump is the latest generation of corrosion-resistant engineering plastics pump, the most prominent advantage is that it has the most excellent in all plastic abrasion resistance, impact resistance, Creep resistance and excellent corrosion resistance. UHB-ZK mortar pump is widely used, widely used in: acid, alkali, salt, oil, alcohol drinks, organic solvents and other liquids, especially for conveying fine particles containing corrosive objects. The following small series to tell you about the working principle of UHB-ZK mortar pump, I hope everyone will be helpful. Analysis of the working principle of UHB-ZK mortar pump Working principle: K-type dynamic seal is mainly composed of vice impeller (or vice) and parking seal (rubber seal) composition. Work due to the Deputy impeller (or deputy leaf) centrifugal force generated by the rotation of the sealed chamber in a negative pressure to prevent liquid leakage to the outside, this time, the parking seal does not work. Rubber lip seal lip loose due to negative pressure, and the sleeve to produce a certain gap between the wear and reduce their wear and prolong the service life; downtime, due to the Deputy impeller (or vice leaves) to stop the rotation, the sealed chamber from negative Pressure to positive pressure, parking seal began to work, the rubber seal lip tightly under the pressure to wrap the sleeve, so as to achieve the purpose of sealing. If allowed to infiltrate into the medium cooling water, the optional use of cooling water K-type dynamic seal, you can add external cooling water device to extend the service life of the seal. The sealed oil seal is made of fluorine rubber, which is mainly suitable for conveying corrosive medium containing solid particles, sewage with impurities, etc. (cooling water with cooling water K-type dynamic seal is clean tap water, the pressure is suitable at 0.05 Mpa or less). Further reading: Motor IFAT China's top ten brands Guangzhou Exhibition building water pump manufacturers ranking ptc Show article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor : Gogoing (QQ / wechat:) starting: http://beng.liuti.cn/ (service hotline:)
The steel ruler water level meter is the most accurate way to measure the water level. A metric or imperial scaled steel ruler attached to a probe that is mounted on a metal or plastic steel. It is usually used to measure the water level in wells, boreholes and water level pipes. It is especially suitable for the observation of groundwater level in hydropower projects or the manual inspection of dam body immersion lines of earth and rock dams. The devices are characterized by a simple, fast and reliable measurement acquisition.
Water Level Meter,Water level indicator, level meter, deep well water level meter
Xi'an Gavin Electronic Technology Co., Ltd , https://www.cngamicos.com