Zhengzhou Ruijun Electromechanical Successfully Developed Double-Action Reciprocating Supercharger

Abstract Zhengzhou Ruijun Electromechanical Equipment Co., Ltd. is a professional enterprise engaged in R&D and production of hydraulic control system for synthetic diamond six-face composite press. Zhengzhou Ruijun Electromechanical Equipment Co., Ltd. General Manager Gushuijun R & D Department has long been engaged in synthetic diamond six-sided press machine liquid...

Zhengzhou Ruijun Electromechanical Equipment Co., Ltd. is a professional enterprise engaged in R&D and production of hydraulic control system for synthetic diamond six-face composite press.

General Manager of Zhengzhou Ruijun Electromechanical Equipment Co., Ltd. Gu Shuijun

The R&D department of the company has long been engaged in the research and manufacture of the synthetic control system for the synthetic control system of synthetic diamond six-sided presses. It has both theoretical basis and practical experience. It has successively developed and produced seven-way top-pressure ultra-high pressure seven-way and no seven. It has nearly ten kinds of hydraulic systems in two series, and has 11 national patents. In 2013, the company successfully developed a double-acting reciprocating supercharger and pressure relief valve; the company can also design a special form of hydraulic system according to user requirements (such as diamond large single crystal production hydraulic station, etc.).

Six-sided diamond press double-acting reciprocating supercharger

Automatic stepless pressure relief valve

The six-faced diamond press double-acting reciprocating supercharger is an innovative product developed by the company on the basis of a single-acting reciprocating supercharger. Its supercharging coefficient is 6.7; the maximum outlet flow rate is 30 liters per minute, the largest import Flow rate: 220 liters per minute; maximum outlet pressure: 150 MPa; maximum inlet pressure: 25 MPa. It is especially suitable for ultra-high pressure equipment required for the synthesis of super-hard materials such as synthetic diamond and cubic boron nitride. The double-acting reciprocating supercharger overcomes the shortcomings of the conventional supercharger with limited volume and easy overtravel. It not only has the advantages of low noise and low failure rate of traditional supercharger, but also has the advantages of good stability, small size, light weight, low power consumption, low price and convenient installation. It is a super-hard material enterprise to improve production efficiency and reduce production cost. best choice.

In order to ensure the reliability and stability of the product quality, the company strictly controls the original supercharger configured, and all of them adopt the three domestic factories with deep production qualifications. The company wins customers by creating value for customers with professional technical ability, strict quality management and honest and thoughtful service. Now customers in Henan, Anhui, Shandong, Hubei, Hunan and other places.

Engineering Veneer is a thin sheet of wood, rotary cut, sliced or sawed from expensive natural wood. The Veneer is easy to be edge jointed and overlaid on Plywood , MDF , particleboard and so on. So, it can be used in fancy plywood, fancy MDF, fancy Blockboard and veneer faced Particle board.We have Natural Engineering Veneer and Engineering Fancy Veneer

Luli Group Co., Ltd, also supply engineered wood veneers with good quality and competitive pricing.

Advantages of using veneers:

Compared to wood, one of the primary advantages of using veneer is stability. While solid wood can be prone to warping and splitting, because veneer is made of thin layers of wood glued together, the chances of splitting or cracking are reduced. Further, the glue used provides additional strength, making the end result stronger than natural wood.

Usages of Veneer:

Used to cover the surface of plywood, MDF, chipboard, blockboard and so on.

Specification details:

Sizes: 1220mm x 2440mm, 1250mm x 2500mm or as your request

Thickness: From 0.15mm to 0.6mm or as per request

Species: Okoume, Bintangor, Terminalia, Red hardwood, etc.

Grade available: A/A, A/B, B/B

Cutting way: Rotary cutting

Engineering Veneer

Engineering Veneer,Natural Engineering Veneer,Engineering Fancy Veneer,Engineered Wood Veneer

Luli Group Co.,Ltd. , https://www.cnluli.com