Fujitsu Air Conditioning (Wax) Â Â Â Maxim Steelwood Interior Door
First, before installation
1. When painting the wall, use a non-corrosive, non-melting waterproof material to cover the wooden door to prevent the paint from adhering to the surface of the product, causing peeling and discoloration and affecting the overall appearance.
2. The wooden door must first be placed horizontally on the ground before installation (the stacking height should not exceed 1 meter), and do not lean against it to avoid deformation.
3. Try to avoid prolonged exposure to sunlight outdoors to prevent the doors from being heated.
4. Place in a dry room, and keep the indoor air circulation to prevent the wooden doors from getting wet.
5. To prevent the wooden door from being bumped or exposed to corrosive substances.
6. Before installation, the door hole must go through the necessary moisture protection and anti-corrosion treatment.
Second, after installation
1. When using the wooden door, do not hang heavy objects on the door leaf or avoid sharp objects touching or scratching.
2. When opening or closing the door leaf, do not use too much force or the opening angle is too large to avoid damage.
3. When taking care of the wooden door with glass, be careful not to infiltrate detergent or water into the gap of the glass bead to prevent deformation of the bead. Do not use too much force when wiping the glass so as not to damage the glass and the person. After the glass breaks or there is a large bump, be sure to ask a qualified service person for maintenance.
4. When clearing the stains on the surface of the wooden door, use a soft cotton cloth to wipe the surface easily with a hard cloth. When the stain is too heavy, use a neutral detergent, toothpaste or a special detergent for furniture, wipe immediately after the detergent. dry.
5. Pay attention to soaking in neutral cleaners or cloths containing higher moisture, do not place on the surface of the wooden door for a long time, otherwise it will infringe the edge surface, make the surface discolor, aging or peeling. 6. Do not touch hot objects and avoid damage.
7. Pay attention to the corners of the wooden door not to be excessive friction, otherwise it will cause the angular paint to fall off.
8. When removing dust from wooden products, use a vacuum cleaner to remove the dust when using a soft cotton cloth. In order to maintain the luster and life of the wooden door, cleaning and dust removal should be carried out regularly.
9. In order to maintain the bright color of the wooden door, regular maintenance should be used to maintain it.
10. When using wooden door products, try to keep indoor air relative humidity between 60% and 75%. In spring and winter, pay attention to good indoor ventilation and maintain indoor humidity, so that the wooden doors are at normal room temperature and humidity to prevent the products from getting wet. The temperature difference is too large and the deformation occurs. The metal fittings are rusted and the edge seals and decorative materials fall off. When using electric heating or other heating equipment during the winter season, keep away from wood products to avoid heat deformation or surface damage.
11. When hinges and locks frequently move parts, they should be tightened in time. When the sound of the hinges occurs in time, the oil can be injected in time. If the lock is not flexible, add a proper amount of pencil-core foam to the keyhole.
12. When there is partial peeling of the wooden door edge seal, it can be ironed firmly with a dry iron pad.
13. The reason for the yellowing of the white paint door should be said to be due to the oxidation of the paint film, avoiding the yellowing of the white paint door is to prevent oxidation, and it is the key to prevent oxidation and avoid direct sunlight exposure.
14. Due to the characteristics of wood drying and shrinking, in the case of large differences in temperature and humidity, such as a slight cracking or shrinkage is a normal natural phenomenon, with the seasonal changes, this phenomenon will naturally disappear .
Doors Doors Wooden doors Brands Three trees Lacquered doors Glass paint Furniture Heating Steel Wood Interior doors Glass furniture Glass doors
High Resistance Alloy is used to produce resistance elementof conductive material.Requirements including High mechanical strength, good corrosion resistance and oxidation resistance. Working temperature is usually at500 ℃. Commonly used with constantan chromium iron, iron chromium aluminum, nickel chromium, nickel, resistivity rho (20 ℃) is 1 Ω was/m or so. It is not used in the conduction of current, but with its high resistance to limit or control the current in the circuit, such as motor, potentiometer, standard resistors, potentiometers, slip line resistor resistance element and resistance line, etc.; For the using of high resistance in the pressure sensor,Temperature compensator and temperature measuring resistor of resistance element to creatte reflect strain, temperature, magnetic field and parameters; High resistance alloy can also be used as heating elements in the manufacture of the resistance heating equipment, could be applied in current, voltage regulating and the winding of control components.
Resistance Electrothermal Alloy
Resistance Alloy,Corrosion Resistant Alloy,Resistance Electrothermal Alloy,Fecral Resistance Heating Alloys
Jiangsu nickel alloy Co.,Ltd , http://www.xhalloy.com