From the perspective of the material structure of the whole wood, the external feeling angle, the production and installation means and the quality control angle, the door and the traditional wooden door are distinguished:
1. From the perspective of overall material construction, there are the following differences:
"Traditional" wooden doors are made of pine or fir for internal structure, and the outer layer is sandwiched with plywood (plywood). Plywood is a multi-layer board. One door has at least 8 glued surfaces from the inner structure to the surface layer, and any glued surface. Problems will be reflected on the surface. Therefore, the irregularities and undulations on the surface of the “traditional†wooden door are the result of problems in the internal glued surface, while the set door adopts pine or fir solid wood as the inner structure, and the outer layer seals the Jixiang environmental protection type MDF. There are only four glued surfaces from the inner structure to the surface layer, which greatly reduces the possibility of unevenness in the surface layer. The traditional door adopts plywood finish, and the solid wood line is edged. There will be color difference between the edge strip and the decorative panel, the edge strip shrinks and degumming, and the set door finish is all solid wood veneer, which avoids the above problems.
2. From the perspective of production and installation methods and quality control, there are the following differences:
“Traditional†wooden doors are generally produced in the workshop or in small factories. The manual factors account for more than 80%, the quality is difficult to control, and the complete set of mechanical equipment processing, from raw materials to finished products, has 18 processes in place, and is used in production. Mutual inspection of the process, the overall "screening" before leaving the factory, the worker self-inspection in the installation, the second inspection of the project manager, the overall inspection method of the company's professional department, the layers are checked and implemented at the same level. This is the "traditional" wooden door production mechanism. Comparable.
3. From the perspective of external perception, there are the following differences:
The veneer of the traditional door plywood surface must be subjected to mandatory heavy sand before leaving the factory, and the already thin veneer is made thinner, and it feels "hard and thin". The set door is made of fine sand technology, and the most suitable sanding thickness is set, which will never “break the bonesâ€. The wood veneer selected by the set door is thicker than the plywood finish, plus the high-pressure vacuum adsorption. After the finished product, the solid wood feels quite good, no matter the sense of sight or feel, it is better than the “traditional wooden doorâ€. "Original, calm and mellow" feeling.
4, the paint process is the biggest difference between the set door and the "traditional" wooden door:
The door painting process needs to pass through the whole white fine sand, partial white fine sand, putty sand, putty sanding, primer one sand (three times), large environmental protection water curtain equipment, dust-free spraying, dust-free Ten procedures such as drying, this is not possible with the "traditional" wooden door operation.
Hot Plate,Electric Hot Plate,Heating Plate,Double Hot Plate
Zenith Lab (Jiangsu) Co.,Ltd , https://www.zenithlabo.com