Wooden furniture has always been favored by consumers. Jiuzheng Building Materials Network suggests that wooden furniture is divided into solid wood furniture, wood-based panel furniture and comprehensive furniture. Pay attention to identification when purchasing.
Solid wood furniture
Solid wood furniture is divided into solid wood furniture, solid wood furniture, and solid wood veneer furniture. All solid wood furniture materials, except the mirror back and the beading, are all solid wood sawn timber and solid wood panels, and the surface finish is usually varnished. The main components of solid wood furniture are solid wood sawn timber and solid wood panels, and the surface is not covered with surface materials. Varnishes are commonly used for surface finishing materials. The secondary parts, such as the bottom plate of the drawer and the back plate of the cabinet, are made of wood-based panels. The main components of solid wood veneer furniture are solid wood sawn timber and solid wood panels, but the solid wood materials used are defective, and a layer of solid wood veneer or thin veneer is attached to the surface.
Wood-based panel furniture
Wood-based panel furniture is made of wood-based panels as the main component. The panels for wood-based panel furniture generally need to be skinned, and the skin materials include veneer, wood grain paper, melamine impregnated paper, fireproof board, and the like. Office furniture and civilian furniture are generally veneered with veneer.
Comprehensive furniture
The main components of the integrated furniture are mainly solid wood and wood-based panel materials, supplemented by other materials, which are significantly different in appearance from solid wood furniture and wood-based panels.
Jiuzheng Building Materials Network recommends that when purchasing wooden furniture, it should start from the following five aspects:
1. Look at the materials. When looking at the wood grain, the wood grain connection on the front, the end face and the back side of the solid wood material has certain regularity and characteristics, which is different from the wood grain of the skin. Second, listen to the sound, tap the surface with your fingers, the solid wood plate is thick and clear. The sound of the wood-based panel is boring. Three smells, solid wood furniture has no irritating odor, and wood-based panel furniture, especially low-grade wood-based panel material, has a pungent and spicy feeling.
2. Look at the structure. Check whether the structure of the furniture is reasonable, mainly depends on whether the furniture is strong and reliable. For example, push the push on the top of the large wardrobe. If the wardrobe is not shaken or twisted, the overall rigidity of the large wardrobe is good and the structure is reasonable.
3. Look at the process. The qualified furniture products are made with fine craftsmanship, the surface finish is smooth and flat, no color difference, no flaws. The parts are tightly bonded and the connection is firm. The door leaf is flat and has no warping deformation, and the splitting of the door leaf and the drawer is uniform and uniform, no more than 2 mm. The edge of wood-based panel furniture must be tight, firm and flat.
4. Look at the environment. Qualified furniture has no pungent taste and a spicy eye feel. The new factory furniture has a faint "paint smell", which is the volatile matter of the paint containing toxic substances. After the paint film is dry, it will not smell anything. Some furniture can smell a strong "paint smell", and it is likely to use non-environmental paint.
5. Look at the attached text. Furniture products must have clear signs and instructions for use, and don't forget to ask for the attached text.
Moving Walkway,Airport Moving Walkway,Moving Sidewalks Airport,Airport Conveyor Belt Walkway
Homefriend&FUJI Elevator Co.,Ltd , https://www.jfujilift.com