Quick exhaust valve overview: Rapid exhaust valve design, simple structure, small size, large displacement, a lot of improvements on the basis of the original to make KP more perfect. Exhaust valve for the highest point of the pipeline or closed place to exclude the gas pipe to clear the pipeline, the pipeline is functioning properly, the water output to meet the design requirements, such as the product does not contain gas in the pipe to form a gas pipeline resistance less than the design requirements. The power failure occurs when the pipeline is in operation. Any negative pressure at any time when the pump is stopped will cause the pipeline to vibrate or rupture. The row of suction valves rapidly inhale a large amount of air to prevent the pipeline from vibrating or rupturing and ensure the safety of the pipeline. The principle of rapid exhaust valve: When the water into the tube, the float stopped in the lower part of the barrel for a lot of exhaust, when the gas is over, the water into the valve float through the ball to close the ball to stop the exhaust pipe in the Normal operation will naturally produce a small amount of gas, the gas concentration to the upper part of the tube to a considerable extent, the valve water and the ball at any time down, the gas vent from the hole.
PTFE Products Co., Ltd. , http://www.qdsealinggasket.com