Before the operation, there are certain opinions and understandings on the operation rules of the stone cutting machine and the accessories of the profile cutting machine.
First, before work
1. Wear overalls and wear eye protection. The female worker will put the hair on the work cap.
2. Power knife switch, saw blade
The tightness, blade guard cutting machine or safety baffle for detailed inspection, the operating table must be stabilized by the laser cutting machine, and there should be sufficient illumination at night. ——It can correctly use pistol drill, portable cutting machine, portable grinder and other electric tools;——can complete the installation of ordinary doors and windows, air-conditioning decorative louvers, light steel keels, ceilings, railings, escalators, etc. according to the product installation process rules, and Adjustment in place; use of stone cutting machine operating procedures and contour cutting machine accessories.
3. Turn on the main switch and test the airwheel for a few laps. It is only allowed to start after the safety is confirmed.
Second, at work
1. Do not wear gloves. Wear a mask or face shield if it can cause dust during operation.
2. Do not attempt to cut small workpieces that are not clamped.
3. This cutting machine only allows cutting profiles.
4. Do not perform strong sawing operation, and make the motor reach full speed before cutting.
5. No one is allowed to stand behind the saw.
6. Do not lean over or bypass the saw machine. Do not loosen any hand or lift the arm from the saw or workpiece when the saw blade is not stopped.
7. Do not operate the guard when it is not in place. Do not place your hand within 15 cm of the saw blade belt machine.
8. Always turn off the power before servicing or replacing the accessories, and wait for the saw blade to stop completely.
9. If there is abnormal sound, stop checking immediately.
Third, after work
1. Turn off the main power supply circular saw
2. Clean and organize the workbench and venue
4. In the event of personal or equipment accidents, the site shall be kept and reported to the relevant department.
Bestware Sensor Faucet Tap brings the fine design and high technology together in all areas of the product process beyond Pull Out Faucet , Commercial Faucet and Commercial Kitchen Faucet. With extensive range of components, we can offer a large selection of both standard Pre-rinse Faucet and custom Basin Tap units as well as flexible combination. Stainless steel is 100% recyclable and is comprised of over 60% recycled material, Bestware faucets are the perfect solution in the commercial and industry for better water quality and the circumvention of the development of deleterious substances and bacteria. No plating, no oxidizing, no rust, lead free.
Sensor Faucet Tap,Pull Out Kitchen Taps,Best Pull Out Kitchen Taps,Pull Out Bathroom Faucet
Bestware Hardware Production Co., Ltd. , https://www.bestwaremfg.com