Small experience in CNC machining

Before drilling with a twist drill on the machining center, we use the drill bit shown in Figure 1 or Figure 2 to pre-drill the locating hole. The advantages are as follows: (1) The rigidity of the drill bit is higher than that of the twist drill, and the pre-drilling locating hole can be improved. Pitch accuracy. (2) Pre-machining the chamfering of the hole, and the twist drill does not need to be chamfered after drilling, which improves the efficiency.

Led Therapy Bulb

Led therapy bulb with E27/E26 socket, Red Light Infrared works for full body, we have 12w 24w 36w bulb, with 660nm and 850nm wavelength, customized led also ok.

The most convenient red light therapy solution

  • E27 therapy bulb Suitable to use on any part of the body.
  • Anything in the first couple of inches of skin can be affected by this light, making it suitable for; hair health, general skin tone/beauty, acne, eczema, wounds, bruises, sunburn, joint pain, wrinkle prevention, and much more.

Panel Led Lighting




Therapy light, led therapy lamp, light therapy lamp, lamps for light therapy, therapy light lamp

Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.szwenyigrow.com

Posted on