The more detailed the more you can see the quality of the construction, the designer's ability and the overall control of the decoration company. The regret for quality is usually caused by negligence in construction, such as wall cracks, uneven yin and yang angles, and so on. Some regrets can be made up the day after tomorrow, and some regrets are incurable. There are a lot of big things to consider in the decoration, so many people often ignore the details, which often leave some regret for the future life, if you pay close attention to these details in the decoration, maybe the future life is not the same, so The details are very important.
[regrets one] The toilet slope is too small
The bathroom floor should be tilted toward the floor drain. However, if the slope is too large, it looks like the effect is not good. If the slope is too small, if there is too much water, it will go outside. The slow drainage will cause the sewage to precipitate during the drainage process, leading to a smelly smell in the bathroom.
Reason for regret:
First, it may be considered that large slopes will affect the appearance of the ground, construction workers will slow down the slope of the toilet; second, the floor tiles are too large, so that the slope is not good to adjust.
Afterwards Zhuge:
If the groundwork has been completed, only to find the slope is too small, it is recommended to select the shower screen, concentrate the water in the shower area, do not flow to other areas; you can hang a shower curtain above the bathtub, blocking the water splash.
[pity two] woodworking rough
Many people prefer to make carpenters to be a bar, wardrobe, etc., but after doing a good job, they regret that they are very different from the finished products sold on the market. They are not rough surfaces, or the lines are not straight.
Reason for regret:
It's best not to make live on the spot. The finished product can be customized according to the size of the home. The on-site production process can not reach, and it may not be environmental protection.
Afterwards Zhuge:
Inside the cabinet, you can polish it with fine sandpaper and then apply varnish. The wooden door can be polished by the workers and then refurbished.
[ pity three] Bathroom cabinets from the skin
Bathroom steam is large, usually with more water, often feel wet. Wooden cabinets in the bathroom, under the door frame or baseboard, will mold after a period of time.
Reason for regret:
This may be just a good decoration, the outer wall of the bathroom is not completely dry, resulting in dampness; it may also be the water inside the bathroom wall to seep out of the water pipe, causing the wall to return to the tide; if the time is very long cabinet with mildew may be the bathroom Usually used too much, caused by too much fog.
Afterwards Zhuge:
The bathroom is too humid, may be because of poor ventilation, in order to alleviate this problem, the door can be replaced with a bathroom-specific door, do wet and dry partitions, install powerful exhaust fans and so on.
ã€Surprisingly four】 Floor arching
The floor appears concave or protruding phenomenon, some tilted up in the four corners, the middle depression;
Reason for regret:
The main reason is that the ground is moist, or because the wooden floor expands after being exposed to moisture, due to the anisotropy of the wood, the local stress of the board is uneven and arches.
Afterwards Zhuge:
It is possible to place furniture on the deformed part of the arching. For example, in the middle of the living room, you can use a coffee table, a stool, etc., and wait until the contraction process of the floor is over.
[Pity 5] There is a crack in the wall that has just been completed
Walls are subject to various cracks due to seasons, construction, construction, etc., especially after the wall of thermal expansion and contraction tests throughout the year, cracks are more likely to appear.
Reason for regret:
One is the cause of wall cracks due to the construction itself; the second is that the decoration team cut corners and materials, and the mixed mortar used for the plastering layer is not proportioned, or the wall surface is cracked without using plaster to level the wall surface.
Afterwards Zhuge:
The appearance of individual cracks is understandable. After all, the walls are also affected by climate or architecture.
If you're not looking right, except for reprocessing the walls, a small area can be covered with the now popular wall stickers and a large area of ​​available wallpaper.
[Sad 6] Loose tiles on the riser
Tiles often appear loosely and empty at the place where the tube is installed. If the decoration is not in place, tiles may fall or crack.
Reason for regret:
In order to save money, the decoration team used a wooden keel to stand up the pipe, and there was no anti-corrosion and waterproof coating. Tiles were not easily glued to the wooden keel, and the wood was damp, causing the tiles to loosen and fall off.
Afterwards Zhuge:
Bao Liguan applies light steel keel and cement board, and must apply waterproof and anti-corrosive paint. Tiles on concrete boards must be hung with wire mesh, otherwise it is easy to fall off. At the same time, the hanging net should be connected to the wall more than 5 cm, and the wall and the cement board should be integrated. For a good decoration and this phenomenon, we must do it again, otherwise it will affect the future use.
Entrance decoration Children's room decoration Cement coating Decoration design Wooden doors Furniture decoration Looking for fitment companies How do you fit the living room Floor tiles Large wardrobe Cabinet cupboard Doors Bathroom Tiles Bathroom doors Toilet door size Bathroom size Overall bathroom Bathroom design Bathroom waterproof Bathroom floor tiles Exterior tile Floor tiles
Our bay light is engineered to emit a brilliant and uniform light output, effectively eliminating shadows and dark corners. With adjustable brightness levels, they offer versatile lighting options to accommodate various tasks and requirements.We understand the significance of reducing energy consumption without compromising on performance. Our bay light incorporates cutting-edge LED technology, ensuring optimal luminance while minimizing energy usage. This translates to lower operating costs and a smaller environmental footprint.Designed to endure the rigors of industrial environments, our high bay lights boast exceptional durability. Constructed using premium materials, they are resistant to impacts, vibrations, and harsh weather conditions, ensuring a prolonged lifespan with minimal maintenance requirements. Efficient heat dissipation mechanisms are integrated into our bay lights' design. This prevents excessive heat buildup, preserving the longevity of both the High Bay Lights and their surroundings. Improved heat management also contributes to enhanced performance and reliability.Tailoring lighting to specific tasks and preferences is crucial. Our Led Bay Lights offer customizable features such as dimming, color temperature adjustment, and even smart controls. This empowers you to create the ideal lighting environment for your space, enhancing productivity and comfort.
Bay Light,High Bay Lights,Led Bay Lights,Ufo High Bay Led Lights
WOSEN LIGHTING TECHNOLOGY LIMITED , https://www.wosenled.com