Our coating and abrasive industry is a small industry. In the past, most of the factories were organized by the individual handicraft workshops of the 1950s. Later, under the leadership and support of the party and the government, we gradually built and developed a linked mechanized production line. Because the enterprises are located in various provinces, cities, and autonomous regions across the country, they are far apart and scattered, and there are few contacts between enterprises. Even if they come and go, they are only carried out among several enterprises that are relatively close together. In 1964, the government called for the nationwide study of Shanghai. The exchanges between enterprises only gradually increased, and they gradually evolved into intensive learning activities among enterprises. **In ten years, the business contacts that just started were almost completely interrupted, and they gradually recovered until the late **.
In November 1977, the Ministry of Machinery's Zhengzhou Abrasives Abrasives Grinding Research Institute (herein referred to as Sanmao Institute) Information Center held an industry-wide technical and intelligence exchange meeting in Wuxi under the support and promotion of various companies. This conference is the first ever event in China's coated abrasive industry. Almost all the coated abrasive companies, research institutes, and schools across the country have participated, not only technical and intelligence personnel, but also the "top leaders" of all units. Almost all participated. It not only expresses the enthusiasm of the nation’s people after the smashing of the “Gang of Fourâ€, but also reflects the eager desire of all units in our industry to strengthen exchanges and strengthen contacts. During the conference, the delegates learned from each other and exchanged experiences. They also learned about the experience of the Chengdu Shabu Factory, an advanced enterprise in Daqing, and exchanged ideas that deepened the feelings and mutual understanding between companies. The conference was a milestone in the history of the development of coated abrasives in China. It laid a solid foundation for the establishment of the Coated Abrasives Association.
Since the Wuxi conference, the relationships among individuals in the industry have been strengthened. Enterprises and enterprises begin to visit each other and learn from each other. Individuals and individuals exchange letters, exchange information, and exchange production and management information. As far as our Jinan Shabu Factory was concerned, we proposed the slogan of studying Shanghai and rushing to Chengdu at the time and formed a sister factory for mutual help with Chengdu Shabu Factory. Every year, our factory organizes personnel to visit and visit the brother factory. At the same time, we also invite the brother factory to guide our factory to work. For me personally, there were more factories to study at that time, more time for public outings, and more frequent and close contacts with brother factories. As contacts increase, so does the relationship between people.
Under such a premise, I personally consider that if a loose organization can be established within the industry, we will take the lead in the industry to convene several more meetings to serve the companies in the industry, and to help them get together, bridge, communicate intelligence, and communicate with each other. Isn't it better? Than you come and go, you can save time, reduce manpower and material costs. However, this was very difficult in the year of the planned economy. Our coating and abrasive industry was still very small at the time, and it was also quite special. Except for the second sand and three sand directly under the Ministry of Machinery, there were only a single sand cloth workshop. Other manufacturers were generally not large or even small, and there were not many local governments. Many of them are collective enterprises. Their ownership is also very different. Some belong to the Machinery Bureau, some belong to the second light bureau or the Civil Affairs Bureau, and others belong to the industrial bureaus or townships of the districts and they do not receive the attention of the higher authorities. Needless to mention the Ministry of Machinery, even the Chinese Abrasives Industry Corporation at that time only paid attention to the grinding wheel industry. The small industry of coated abrasives was not linked to the company, and some meetings and events held by Zhongmo Company were not notified. Companies with abrasives participate. Although Sanmoruo is not an administrative leader, its intelligence department and standards department sometimes hold some professional meetings, but not all the units that are notified to participate. In this case, probably from 1982 onwards, I used letters to write and go out to visit and participate in related conferences. I also discussed with brothers factory leaders and related personnel about the establishment of industry organizations. I successively weighed and talked with sister companies such as Shenyang, Beijing, Tianjin, Jiamusi, Shijiazhuang, and Chengdu, and got their general approval, especially the most frequent and frequent contact with the factory director of Sandi cloth factory in Shenyang. It was also considered at that time. What was the organization called? No one can tell. The names of industry associations, federations, or sororities have been proposed. At that time, trade associations were still a new thing in the country, and there were few establishments. Therefore, this matter can take a lot of trouble. Together with Sun Deyi's factory manager or separately, I took the opportunity of business trips and meetings to run the Sanmaosuo and Zhongmo companies to consult, report and discuss with relevant personnel. At that time, it was not easy to find the manager of Zhongmo Company. At the beginning, they could only talk to the general staff (such as Xu Ziqing and Wang Yu) and then report to the manager through them. Their answer after the study was: the establishment of industry organizations is the direction of the industry development, and some industries are also brewing to set up associations, but there is no precedent and mature experience, we still have to wait. The director of the Sanmao Institute is also very busy and difficult to find, but they often contact their intelligence agencies and standards departments. They all say that they are very supportive, but they can't tell what they should do.
At about the beginning of 1984, Zhengzhou Sixth National Cotton Factory and Zhengzhou Second Printing and Dyeing Factory held a cotton supply meeting in the Zhengzhou Liumian Guest House. I and Sun Deyi, the factory manager, took the opportunity to participate in this meeting, first to find the manager of Zhongmo Meng Qinghui and Relevant personnel later found the president of the Sanmao Institute, He Quanquan, and gave a detailed report. This time, he received strong support from Director He Yiquan. He immediately stated that he supported the establishment of an industry association and agreed to take the opportunity of the six cotton guest house to hold a meeting. The meeting was presided over by Director He, and the leaders of the Sanmao Intelligence Office, Li Xiaokuan, He Zuosheng, Zhang Zhendong, and Ma Yongsen and Zhang Changwu in the standard room attended the meeting. Zhongzi Company’s Xu Ziqing and Wang Yu also attended the meeting. In terms of business, the main manufacturers participating in the conference are Beijing, Tianjin, Jiamusi, Wuxi, Wuhan, Shijiazhuang, Shenyang, Shanghai, Ersha and Jinan, as well as suppliers of raw materials such as Zhengzhou Liumian and Erin. Everyone unanimously agreed that it is necessary to set up an industry association. It can not only strengthen the communication and communication between enterprises, exchange information and information, promote the unity and cooperation of enterprises, but also save the cost of mutual exchanges for enterprises. The meeting studied the drafting of the association's articles of association, as well as the location, time and personnel of the association's preparatory meeting, as well as related matters relating to the company. After the meeting, I and Sun Deyi, general manager of the division of labor, I was responsible for contact with the brother manufacturers, Sun director responsible for the drafting of the constitution. After a period of preparations, Director Sun Deyi and I made a report to the director of He Yiquan, who is currently in the Beijing Ministry of Machinery, and discussed related matters for holding the association's preparatory meeting.
On April 12-14, 1984, Sanmao was the convener of the preparatory meeting and the preparatory meeting for the Coated Abrasives Industry Association was held in Sanmao, Zhengzhou. Zhengzhou Sanmao, Jinan Shabu, Shenyang Shabu, Wuhan Shabu, Xi'an Grinding, Tianjin Shabu Sandpaper, Beijing Dongsheng Shabu, Shanghai Grinding, Second Grinding, Third Grinding, Nanchang Shabu, Chengdu Responsible persons from twelve companies such as Jingang Shabu Factory participated in the meeting. The meeting reviewed the draft articles of association, membership criteria, and payment of contributions, discussed the first batch of participating companies, and determined the time for the establishment of the industry association. location.
From May 27 to May 30 of this year, the founding conference of Tuo Abrasives Association was grandly held in the Quancheng Hotel in Jinan. Leaders from Shandong Province and Jinan City attended the meeting. After four days of meetings, delegates fully discussed the meeting. The draft of the statute, and proposed amendments, confirmed the list of the first batch of companies that joined the association, and produced the candidates for the first council's first board of directors, deputy directors and secretary-general. Through serious discussion, the meeting approved 28 units through secret ballot, including 25 companies, 2 research institutes, and 1 school as the first batch of member units; the president of the Sanmao Institute was elected as the member of the association. Chairman of the Board of Directors, elected Liu Mingyi, Director of the Shabu Factory in Jinan, Sun Deyi, Director of the Shabu Factory in Shenyang, and Guo Xiangxian, Director of the Wuhan Shabu Factory; Elect Sanmao Institute, Shenyang Shabu Factory, Jinan Shabu Factory, Wuhan There are 8 units including Shabu Factory, Second Grinding Factory, Shanghai Grinding Wheel Factory, Beijing Dongsheng Shabu Factory and Tianjin Shabu Sandpaper Factory. After discussion at the meeting of directors, it was decided that the chief of the Sanmoriya intelligence room was the first secretary of the council. The meeting passed the association's articles of association and the work and tasks of the first association by means of a show of hands, and finally passed the minutes of the conference and other documents.
Recalling the establishment process of the Coated Abrasives Industry Association, because of his age, many things are not remembered, but what remains most impressive in my mind is: unlike other top-down industry associations Our association is founded on our own strength and "spontaneously". In the eyes of many people, we are insignificant, but it is these insignificant forces that we have assembled together that have become a major event that others believe is still impossible. Although we started to set up the "China Coated Abrasives Industry Association" could not find her husband's family, the name has changed several times until many years later it justified to become the China Machine Tool and Tool Industry Association subordinate branch of the Coated Abrasives. However, since we are established "spontaneously", we have infinite power from the very beginning and have a strong vitality. No one can deny that the timely establishment of the Coated Abrasives Industry Association has played an important role in the development of the Chinese coated abrasive industry in the 1980s and 1990s.
In November 1977, the Ministry of Machinery's Zhengzhou Abrasives Abrasives Grinding Research Institute (herein referred to as Sanmao Institute) Information Center held an industry-wide technical and intelligence exchange meeting in Wuxi under the support and promotion of various companies. This conference is the first ever event in China's coated abrasive industry. Almost all the coated abrasive companies, research institutes, and schools across the country have participated, not only technical and intelligence personnel, but also the "top leaders" of all units. Almost all participated. It not only expresses the enthusiasm of the nation’s people after the smashing of the “Gang of Fourâ€, but also reflects the eager desire of all units in our industry to strengthen exchanges and strengthen contacts. During the conference, the delegates learned from each other and exchanged experiences. They also learned about the experience of the Chengdu Shabu Factory, an advanced enterprise in Daqing, and exchanged ideas that deepened the feelings and mutual understanding between companies. The conference was a milestone in the history of the development of coated abrasives in China. It laid a solid foundation for the establishment of the Coated Abrasives Association.
Since the Wuxi conference, the relationships among individuals in the industry have been strengthened. Enterprises and enterprises begin to visit each other and learn from each other. Individuals and individuals exchange letters, exchange information, and exchange production and management information. As far as our Jinan Shabu Factory was concerned, we proposed the slogan of studying Shanghai and rushing to Chengdu at the time and formed a sister factory for mutual help with Chengdu Shabu Factory. Every year, our factory organizes personnel to visit and visit the brother factory. At the same time, we also invite the brother factory to guide our factory to work. For me personally, there were more factories to study at that time, more time for public outings, and more frequent and close contacts with brother factories. As contacts increase, so does the relationship between people.
Under such a premise, I personally consider that if a loose organization can be established within the industry, we will take the lead in the industry to convene several more meetings to serve the companies in the industry, and to help them get together, bridge, communicate intelligence, and communicate with each other. Isn't it better? Than you come and go, you can save time, reduce manpower and material costs. However, this was very difficult in the year of the planned economy. Our coating and abrasive industry was still very small at the time, and it was also quite special. Except for the second sand and three sand directly under the Ministry of Machinery, there were only a single sand cloth workshop. Other manufacturers were generally not large or even small, and there were not many local governments. Many of them are collective enterprises. Their ownership is also very different. Some belong to the Machinery Bureau, some belong to the second light bureau or the Civil Affairs Bureau, and others belong to the industrial bureaus or townships of the districts and they do not receive the attention of the higher authorities. Needless to mention the Ministry of Machinery, even the Chinese Abrasives Industry Corporation at that time only paid attention to the grinding wheel industry. The small industry of coated abrasives was not linked to the company, and some meetings and events held by Zhongmo Company were not notified. Companies with abrasives participate. Although Sanmoruo is not an administrative leader, its intelligence department and standards department sometimes hold some professional meetings, but not all the units that are notified to participate. In this case, probably from 1982 onwards, I used letters to write and go out to visit and participate in related conferences. I also discussed with brothers factory leaders and related personnel about the establishment of industry organizations. I successively weighed and talked with sister companies such as Shenyang, Beijing, Tianjin, Jiamusi, Shijiazhuang, and Chengdu, and got their general approval, especially the most frequent and frequent contact with the factory director of Sandi cloth factory in Shenyang. It was also considered at that time. What was the organization called? No one can tell. The names of industry associations, federations, or sororities have been proposed. At that time, trade associations were still a new thing in the country, and there were few establishments. Therefore, this matter can take a lot of trouble. Together with Sun Deyi's factory manager or separately, I took the opportunity of business trips and meetings to run the Sanmaosuo and Zhongmo companies to consult, report and discuss with relevant personnel. At that time, it was not easy to find the manager of Zhongmo Company. At the beginning, they could only talk to the general staff (such as Xu Ziqing and Wang Yu) and then report to the manager through them. Their answer after the study was: the establishment of industry organizations is the direction of the industry development, and some industries are also brewing to set up associations, but there is no precedent and mature experience, we still have to wait. The director of the Sanmao Institute is also very busy and difficult to find, but they often contact their intelligence agencies and standards departments. They all say that they are very supportive, but they can't tell what they should do.
At about the beginning of 1984, Zhengzhou Sixth National Cotton Factory and Zhengzhou Second Printing and Dyeing Factory held a cotton supply meeting in the Zhengzhou Liumian Guest House. I and Sun Deyi, the factory manager, took the opportunity to participate in this meeting, first to find the manager of Zhongmo Meng Qinghui and Relevant personnel later found the president of the Sanmao Institute, He Quanquan, and gave a detailed report. This time, he received strong support from Director He Yiquan. He immediately stated that he supported the establishment of an industry association and agreed to take the opportunity of the six cotton guest house to hold a meeting. The meeting was presided over by Director He, and the leaders of the Sanmao Intelligence Office, Li Xiaokuan, He Zuosheng, Zhang Zhendong, and Ma Yongsen and Zhang Changwu in the standard room attended the meeting. Zhongzi Company’s Xu Ziqing and Wang Yu also attended the meeting. In terms of business, the main manufacturers participating in the conference are Beijing, Tianjin, Jiamusi, Wuxi, Wuhan, Shijiazhuang, Shenyang, Shanghai, Ersha and Jinan, as well as suppliers of raw materials such as Zhengzhou Liumian and Erin. Everyone unanimously agreed that it is necessary to set up an industry association. It can not only strengthen the communication and communication between enterprises, exchange information and information, promote the unity and cooperation of enterprises, but also save the cost of mutual exchanges for enterprises. The meeting studied the drafting of the association's articles of association, as well as the location, time and personnel of the association's preparatory meeting, as well as related matters relating to the company. After the meeting, I and Sun Deyi, general manager of the division of labor, I was responsible for contact with the brother manufacturers, Sun director responsible for the drafting of the constitution. After a period of preparations, Director Sun Deyi and I made a report to the director of He Yiquan, who is currently in the Beijing Ministry of Machinery, and discussed related matters for holding the association's preparatory meeting.
On April 12-14, 1984, Sanmao was the convener of the preparatory meeting and the preparatory meeting for the Coated Abrasives Industry Association was held in Sanmao, Zhengzhou. Zhengzhou Sanmao, Jinan Shabu, Shenyang Shabu, Wuhan Shabu, Xi'an Grinding, Tianjin Shabu Sandpaper, Beijing Dongsheng Shabu, Shanghai Grinding, Second Grinding, Third Grinding, Nanchang Shabu, Chengdu Responsible persons from twelve companies such as Jingang Shabu Factory participated in the meeting. The meeting reviewed the draft articles of association, membership criteria, and payment of contributions, discussed the first batch of participating companies, and determined the time for the establishment of the industry association. location.
From May 27 to May 30 of this year, the founding conference of Tuo Abrasives Association was grandly held in the Quancheng Hotel in Jinan. Leaders from Shandong Province and Jinan City attended the meeting. After four days of meetings, delegates fully discussed the meeting. The draft of the statute, and proposed amendments, confirmed the list of the first batch of companies that joined the association, and produced the candidates for the first council's first board of directors, deputy directors and secretary-general. Through serious discussion, the meeting approved 28 units through secret ballot, including 25 companies, 2 research institutes, and 1 school as the first batch of member units; the president of the Sanmao Institute was elected as the member of the association. Chairman of the Board of Directors, elected Liu Mingyi, Director of the Shabu Factory in Jinan, Sun Deyi, Director of the Shabu Factory in Shenyang, and Guo Xiangxian, Director of the Wuhan Shabu Factory; Elect Sanmao Institute, Shenyang Shabu Factory, Jinan Shabu Factory, Wuhan There are 8 units including Shabu Factory, Second Grinding Factory, Shanghai Grinding Wheel Factory, Beijing Dongsheng Shabu Factory and Tianjin Shabu Sandpaper Factory. After discussion at the meeting of directors, it was decided that the chief of the Sanmoriya intelligence room was the first secretary of the council. The meeting passed the association's articles of association and the work and tasks of the first association by means of a show of hands, and finally passed the minutes of the conference and other documents.
Recalling the establishment process of the Coated Abrasives Industry Association, because of his age, many things are not remembered, but what remains most impressive in my mind is: unlike other top-down industry associations Our association is founded on our own strength and "spontaneously". In the eyes of many people, we are insignificant, but it is these insignificant forces that we have assembled together that have become a major event that others believe is still impossible. Although we started to set up the "China Coated Abrasives Industry Association" could not find her husband's family, the name has changed several times until many years later it justified to become the China Machine Tool and Tool Industry Association subordinate branch of the Coated Abrasives. However, since we are established "spontaneously", we have infinite power from the very beginning and have a strong vitality. No one can deny that the timely establishment of the Coated Abrasives Industry Association has played an important role in the development of the Chinese coated abrasive industry in the 1980s and 1990s.
Street Bench,Composide Wood Bench,Wood Plastic Bench
Composite Decking Co., Ltd. , http://www.plastic-wood.com