Reasons and solutions of motor overheating in arc gear pump

Motor overheating arc gear pump in the course of the work of the problem, the specific causes and solutions are as follows: 1, the use of the range (flow, lift) than the KCB series gear pump design requirements of the spectrum by the appropriate series of motor 2, the medium Data exceeds the gear pump configuration Motor configuration suitable medium gear pump motor 3, the packing gland pressure is too tight or mechanical seal spring is too tight Adjust the gland or mechanical seal spring compression 4, the pump assembly quality is poor, there is Friction or motor and gear shaft is not the same Heart to check the assembly quality, troubleshooting can be assembled for the above conditions, one by one to do the analysis to find out the real cause of motor overheating, in accordance with the corresponding fault, maintenance treatment. Gear pump to achieve the normal operation!

Diamond Grinding Heads

Diamond grinding head: A kind of stone material, ceramic materials and other non-metallic materials of grinding tools, especially involving a with diamond alloy grinding tools for grinding body, it includes substrate and a mill body, in which several mill body clearance to fixed to the substrate, the grinding surface of the grinding head grinding body also set a clearance, among them, the substrate is best by a certain toughness of adhesive materials, The abrasive body is preferably made of diamond alloy material. The utility model has the characteristics of high grinding performance, simple manufacture, low cost, high grinding quality and can be applied to large-scale grinding

Through the processing of various workpiece, to achieve grinding, grinding, polishing effect; According to the use, mainly divided into the following types of grinding head:

1.grinding class: mainly installed in the grinding machine grinding head, the workpiece for grinding, grinding, grinding, processing can be divided into rough grinding and fine grinding.

2.grinding class: generally used for grinding the burr of the workpiece, or the workpiece surface precision is not high processing. Use grinding machine, electric, pneumatic and other tools to high-speed operation to achieve the effect of grinding.

3.polishing class: specially for surface finish (roughness) processing and use of higher requirements, is the need for separate processing process.

Diamond Grinding Heads,Diamond Bit Set,Diamond Cut Off Wheel,Diamond Stone Grinding Wheels

Henan Jinlun Superhard Material Co., Ltd , https://www.jlsuperhard.com