It is reported that the mobile company will soon launch a "mobile phone card," that is to say, with a specific mobile phone card in the future, you can also swipe your card for public transportation. From August 12, the newly added 10 recharge service outlets of the Citizen Card Company are all in the mobile business office.
Among these 10 outlets, it is not only possible to recharge mobile phones and mobile phones, but also to recharge IC cards and citizen cards. These 10 outlets are tentatively scheduled to open on August 12. By then, citizens can go to these mobile business offices to handle the citizen card business. However, other branches of the mobile company cannot yet handle it.
It is also understood that the mobile phone "card" service to be launched by the mobile company is an integrated mobile payment product based on the SIM card. This product not only supports normal mobile phone communication, but also supports buses, subways and small payment "brush" machines. Paying. This business is currently in the trial phase and the official opening date has not yet been determined.
The Nanjing Citizen Card is a smart IC card with an appearance similar to an ID card. It has photos, name, ID number, social security account number, UnionPay card number and other information. There is a chip on the front and a magnetic stripe on the reverse side. It is an integrated social security. The card chip, Jinling Tong card chip and bank magnetic stripe are integrated cards.
"The mobile company is trying to unify the mobile phone's SIM card with the citizen card and IC card functions." Also learned that the recent mobile company's "mobile wallet" will be officially launched, then at 10 mobile business outlets, you can also apply for the public Card business.
A wire rope clamp (sometimes called a clip) is used to secure the loose end of the loop back to the wire rope. It usually consists of a U-bolt, a forged saddle, and two nuts. Two layers of wire rope are placed on the U-bolts. Then slide the saddle over the rope and attach to the bolts (the saddle includes two holes for the U-bolts). Nuts hold the unit in place. The wire rope is usually terminated using two or more clips depending on the diameter. A 2" (50.8 mm) diameter rope may require as many as eight.
There is an old saying: "A dead horse is without a saddle". This means that when installing the clips, the saddle portion of the assembly should be placed on the load bearing or "live" side of the cable, not the non-load bearing or "live" side of the cable. The "no power" side. According to U.S. Navy Manual S9086-UU-STM-010 Chapter 613R3, Wire and Fiber Ropes and Slings, "This is to protect the live or pressure-bearing end of the rope from pinching and damage. The flat bearing housing and body (saddle-shaped ) extension claws are designed to protect the rope and remain on the live end at all times."[18]
The U.S. Navy and most regulatory agencies do not recommend using such clips as permanent terminals unless regularly inspected and retightened. Encyclopedia website: ewikizh.top
Wire Rope Clips,Wire Rope Clamp,Grips Clips And Clamps,Stainless Steel Wire Clips
Jiangsu Hongze Stainless Steel Wire Rope Co., Ltd , https://www.hzrope.com