The light partition wall board is made of light-weight materials such as non-hazardous phosphogypsum, light steel slag, and fly ash, or lightweight structures. The two sides are provided with boring heads and grooves, and the surface density is not greater than the standard value. (90kg/m2: 90 plates, 110 kg/m2: 120 plates) Prefabricated panels for non-load-bearing internal partitions for industrial and civil buildings. The following small series introduces the installation process of lightweight partition board and the characteristics of lightweight partition board.
Lightweight partition board installation process
1. Put the line up and lift the board: In the installation position of the wall board, the baseline of the bomb is perpendicular to the bottom of the board or the bottom of the beam, to ensure that the wall board is installed straight, and a 1.49 square wall board can handle them freely.
2. Saw Blades: According to the requirements, any hand-cutting machine can be used to adjust the width and length of the wall plate so as to reduce the loss rate of the wall plate.
3, sizing: use cement and sand (1:2) plus construction glue to make a paste, first use water to brush the concave and convex grooves of the wallboard, and then apply the polymer mortar in the concave and convex groove of the wallboard and the floor baseline. Inside.
4, loading plate: put the mortar on the wall board to the loading position erected, up and down to a good baseline position, with a spade to pick up the wall from the bottom force to make the plate and the plate tight.
5, in place: the wall plate close to force, so that the mortar out from the seam to ensure that the mortar full, with a wooden wedge to temporarily fix it.
6. Correction: Use a straight ruler with a flatness and verticality of 2 meters to check: adjust the iron file and fix it with a wooden wedge and a steel bar.
7. Nailing: The connection between the wallboard and the wallboard must be anchored with Φ6×200mm steel diagonally at 45°.
8. Fixation: After correcting with both sides of a 30×30mm wooden wedge, drill with a 45° angle of impact drill in the middle of the boring head or tongue and groove, and then anchor with a Φ6×200mm steel bar.
9. Grout: Install cement mortar for correct wallboard (1:2) and add construction glue to adjust the joints between the upper and lower seams and the board-to-board joints and remove the wooden wedges. Fill it with mortar.
10. Slotting embedding pipe: if buried underground pipelines, switch boxes, etc., can be installed with impact drills or hand-held chainsaws for cutting wire troughs. After the installation, grouts can be filled with mortar polymer.
11, the installation of the door frame: the door frame can be used directly on the wall plate plywood bag door cover, anchored with nails and walls, with a decorative board cover.
12, plaster coating: the final coating layer coating can be. If it is applied to ceramic tiles, it is not necessary to scrape gray, and the tiles can be directly attached to the wall plate with cement paste, and it is also possible to directly paste wallpaper, wood trim boards, etc.
Lightweight partition board features
1, environmental protection and energy saving. No harmful gases are emitted. This product is made of environmentally friendly materials and has no cement.
2, fire prevention. This product is Class A fireproof material, fire resistance limit ≥ 1h.
3, insulation. High thermal insulation coefficient, heat transfer coefficient ≤ 2.0W/(m2.K).
4, soundproofing. Sound insulation coefficient is good, air sound insulation ≥ 35db, suitable for high noise places such as KTV.
5, single point suspension force. A single point of hanging force >1000N can be used with steel nails, bloated air conditioners, televisions and other items.
6, increase in earthquake resistance. The weight per square meter of similar products is about 80 kilograms, and the weight of our products is 30 kilograms per square meter.
7, reduce costs and shorten the duration. One-third of the original construction period is a one-piece installation of products, which greatly shortens installation time and reduces capital costs.
8, waterproof and moisture. Our company's products have no cement, which fundamentally solves the anti-halogen problem.
9. The construction conditions are not limited. Cement products cannot be constructed in winter, and our products are not affected by the temperature season.
10. Save space. Compared with traditional walls, our company's wall can increase its use area by 8.5% per 100 square meters.
11, high quality. The product is generated by an automated assembly line with no error and high flatness.
12. Diversified selection of decorative products. With more than 100 kinds of finishes to choose from, set partition, decoration in one.
13, low loss. Products are light, easy to transport, and have strong arbitrariness.
14, can be reused. Temporary installation mode can be selected for easy disassembly and reuse.
15, the slot installation of a molding. In the wall installation process can be added to the trunking, no need to install the second time the broken wall, effectively improve the efficiency of the entire assembly.
16, useful life. Design life of 70 years.
The use of lightweight partition board
1, efficient insulation, especially suitable for use in cold regions.
2. Lightweight materials, which reduce the weight of the structure and reduce the earthquake effect, especially suitable for high-rise buildings and high-intensity areas.
3, both inside and outside walls can be used, can be directly paste tiles.
4, suitable for a variety of general environmental conditions, corrosion resistance and weathering ability.
5, aluminum plastic panel curtain wall and glass curtain wall lining insulation material.
6. Upgrading of color steel retaining wall of steel structure factory.
7, rocking installation, deformation ability, especially for high-rise steel structure of the wall cladding retaining material.
8. It is suitable for the re-segmentation of existing buildings, and is especially suitable for the addition of existing houses.
Editor's summary: The features of the lightweight partition board installation process and lightweight partition board are introduced here, and we hope to help everyone. If you want to know more about yourself, you can follow the information on this site.
Lightweight partition board partitions lightweight partition board
Children'S Room,Kids Room,Children Bedroom,Children Customization Wardrobes
Ningbo Oulin Import&Export Co.,Ltd. , https://www.oulinfurniture.com