Nowadays, many pieces of furniture are panel furniture made by fiberboard machines. If moisture penetrates into it, the formaldehyde and other additives have not completely volatilized in the first two years.
However, once the additives evaporate, the moisture of the wet cloth will cause the furniture to mold. If the residents on the lower floors, the panel furniture at home may be "mildew" every year.
I would also like to remind you that even if the surface of some furniture is lacquered, it can be properly scrubbed with clean water. Do not leave the wet rag on the surface of the furniture for a long time to prevent moisture from seeping into the wood.
When wiping furniture, do not use coarse cloth or old clothes that are no longer worn as rags. It is best to use towels, cotton cloth, cotton fabrics, or flannel cloth to wipe furniture.
Thick cloth, cloth with thread ends or old clothes with stitches, buttons, etc. that can cause scratches on the furniture surface should be avoided as much as possible.
When cleaning and maintaining furniture, you must first determine whether the rags used are clean.
After cleaning or wiping off the dust, be sure to turn it over or use a clean cloth.
Don't be lazy and reuse the dirty side again and again. This will only cause the dirt to rub repeatedly on the furniture surface, but will damage the shiny surface of the furniture.
At the same time, do not use a dry rag to wipe the dust on the surface of the furniture. Many people are used to cleaning the surface of the furniture with a dry rag.
In fact, these fine particles have damaged the paint surface of the furniture in the rubbing back and forth.
Although these scratches are minimal and even invisible to the naked eye, over time, the surface of the furniture will be dull and rough, and the light will no longer be bright.
The correct method is to use a soft dry cloth to wipe off the dust, and then wipe it with a soft cotton cloth with a soft texture. The cotton cloth should be slightly damp and should not be squeezed out of water.
When the furniture is wiped, follow the grain direction of the wood. At the same time, alcohol and other chemical solvents or detergents must not be used to avoid corroding the surface of the furniture.
The above content is published by Tingshi Furniture
Boron nitride ceramics have good heat resistance, thermal stability, thermal conductivity, high temperature dielectric strength, and are ideal heat dissipation materials and high temperature insulation materials. Boron nitride has good chemical stability and is resistant to most of the molten metal. It also has good self-lubricating properties. Boron nitride products have low hardness and can be machined with an accuracy of 1/100 mm. Boron nitride can be used in the manufacture of high-temperature containers for metallurgical melting, semiconductor heat-dissipating insulation parts, high-temperature bearings, thermowells, and glass forming dies.
Boron Nitride Ceramic,Hexagonal Boron Nitride Ceramics,Hot Pressed Boron Nitride,Pyrolytic Boron Nitride Ceramic
Dongguan Haikun New Material Co., Ltd. , https://www.hkceram.com