The bearing temperature monitoring bearing bush is the moving part of the press, which has high precision and high failure rate, especially the main shaft bearing bush is more prominent. If the load is too large, poor lubrication, oil contamination, etc., the bearing bush may be damaged, and the press will not work properly. If the load is too large, poor lubrication, oil contamination, etc., the bearing bush may be damaged, and the press will not work properly. The state of the bearing bush can be reflected by its temperature. The imported large press generally monitors the temperature of the bearing bush. If the temperature of the bearing bush exceeds the specified limit value, the press will automatically stop.
Oil pollution monitoring 50% of machine failures are caused by pollution. Heat, humid chamber gases and particulates can damage the oil in the machine, causing machine wear and failure. By monitoring hydraulic oil, gear oil and lubricating oil, it can effectively prevent abnormal wear of gears, bearings, sliders and guide rails caused by oil pollution. Lubricating oil in place to monitor the lubrication system in the lubrication system and other faults can cause wear and tear on the moving parts of the machine, and even sintering. Therefore, the flow detection can be performed for each lubricating component, and the alarm should be reported below the rated value.
Bedroom Cabinet,White Bedside Cabinets,Grey Bedside Cabinet,Black Bedside Cabinets
Ningbo Oulin Import&Export Co.,Ltd. , https://www.oulinfurniture.com