1. After unpacking, first check whether the equipment is damaged in the transportation, then put the high machine and auxiliary electric control device in place, and then connect the main and auxiliary machine pipe roads. The seal is painted with “iron anchor 609†liquid sealant to ensure the tightness of the pipeline. At the same time, each single machine and pipe flange are connected by grounding wire and grounded to avoid dust explosion caused by static spark.
2. Before each single machine is tested, it is necessary to check whether there are metal objects in the machine, and if it is, remove it. Whether the bolt is firm, the tightness of the belt, the reliability of the shield, etc.
3. Start the steady operation of each motor in the following sequence, close the damper start, plastic pulverizer -> dust collector -> grading device -> screw feeder -> open damper -> air damper.
4. After five minutes of empty car operation, the operator should carefully observe the various instruments on the control cabinet, and wait until the no-load current is stable before feeding. After the feeding, the current is not allowed to exceed the rated value of 32.6A, otherwise the amount should be reduced to ensure that the normal operation of the discharge electric can work regularly.
5, can be stopped in the following order? Screw feeder -> after five minutes of operation can stop the crushing host, dust collector, classifier -> air lock.
6. Operate the stepless shifting handle of the classifier to change the speed of the classifying wheel and at the same time achieve the fine adjustment of the product. If the product size is required to be fine, the rotation speed can be increased, and vice versa, the particle size can be increased.
1. After starting, when the standby device reaches normal operation, it is allowed to feed the crop evenly and continuously.
2. Pay attention to the motor, the speed of the thresher, the sound and the temperature of the bearing.
3. When feeding, the operator should stand on the side of the feeding port, the sleeves of the clothes should be tight, and the mask and work cap should be worn.
4. When feeding, pay attention to whether the grain has hard objects such as stones, trowels, and tool screws to avoid damage to the machine and body accidents.
5, the machine does not allow to hang the belt, oil injection, cleaning and troubleshooting.
6, found that the following problems should be shut down the engine, shutdown processing, 1 motor smoke, 2 blocked, 3 crush quality is not good, 4 bearings overheated, more than 60 degrees.
Plastic shredder manufacturers http://
COB LED Track Lights are single-optic LED platforms that combine form, function, and visual comfort. Because of its complete flexibility in lumen output and beam angles, it enables optimal lighting designs, including extremely tight accent applications. Designers can customize the light output with interchangeable reflectors to create the ideal environment. In addition, all COB LED Track Lights produced by LiteHome undergo an 8-hour burn-in test before production to ensure that customers receive products in good condition and in a good performance. By choosing LiteHome, you can buy high-quality products at manufacturer prices.
LiteHome Track Head Light has the following advantages:
1. Die-cast aluminum, better and faster heat dissipation of the lamp, less light decay and longer life;
2. Brand LED cold light source, no radiation, no heavy metal pollution, excellent performance, pure and rich color, high brightness, low-frequency flashing, energy-saving and healthier;
3. High-efficiency optical grade lens, low light loss, good illumination;
4. High-power transformer, the perfect combination of lamps, electrical appliances and light sources;
5. Lightweight, simple, beautiful and easy to install and replace.
6. A variety of beam angles for you to choose from: 15°, 60°, 90°
7. It can Rotate up and down 350°, and rotate left and right 350°. Can illuminate in all directions.
Led Spotlight Ceiling,Led Spotlight Fittings,Spotlight Led Lights,Track Light Heads,Gallery Light,Spotlight Track Light,Led Spotlight,Led Downlight
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com