Guilin--the place of production of high quality putty

In the entire Guangxi putty powder industry, Guilin putty powder is best known in Guangxi. With good raw materials, heavy calcium and light calcium, and well-developed transportation conditions, after decades of experience in the production of industrial plants to form a concentrated market, brand formation, the country is well-known higher, and the output ranks first in the country. Why is it good? Where is it? This first choice is related to the surrounding geology and mineral deposits in Guilin. The surrounding Hezhou of Guilin is the country's factory talc, the capital of heavy calcium, is very close to Guilin, and Guilin is the most developed city in this area. There are more and more putty powder factories in Guilin. The popularity has started in the country. The following are the national standards for putty, and the raw material production process. Guilin Wall Bao Paint Co., Ltd. Leading the industry for manufacturers. 10 years experience in the factory, is the leader in the putty industry.

Good formula: The raw materials for putty powder produced by large companies are all raw materials in the world. Small manufacturers cannot use these raw materials, and the cost is too high. This is the reason why you have to choose a large factory for putty powder. Today, the theme is environmental protection, green, net taste, and health. The room environment is increasingly strict.

Guilin putty, as a national large-scale concentration place for the putty industry, although there are manufacturers of putty powder in all parts of the country, why is it that Guilin putty has a reputation? This first choice is related to the surrounding geology and mineral deposits in Guilin. Hezhou, the same side of Guilin, is the country's factory talc, the city of heavy calcium, is very close to Guilin, and Guilin is the most developed city in this area. There are more and more putty factories in Guilin. The popularity has started in the country. The following are the national standards for putty, and the raw material production process. Guilin Wall Bao Paint Co., Ltd. Leading the industry for manufacturers. 10 years experience in the factory, is the leader in the putty industry.

The national standard for putty products to be implemented is "JG/T3049-1998 "Building putty for interior use"", which is equivalent to the product entry examination for the putty industry. How to see if a putty is able to "reach the standard"? I teach you a few tips:

1, see the packaging. The shoddy small businesses generally have no sense of “reaching standards.” If you search for the packaging of their products, you will not find the words “JG/T3049-1998 “Building Interior Putty””. Just look at this and you can see a lot of shoddy products. Was ruled out.

2, Mo model. The template allows you to see the product more intuitively. Wipe it with your hand and draw a stroke with your key. You can feel what the product is.

3, to report. The product inspection report is the best description of the product quality. At present, the putty product has not been exempted from inspection. If the merchant does not obtain the inspection report, most of the products are not up to standard; after getting the inspection report, it is necessary to pay attention to whether the relevant indicators meet the requirements. , and pay attention to the date of release of the report. Over one year is also an invalid report that is automatically invalidated.

The second point: environmental protection requirements - ten ring certification!

Although putty is generally composed of inorganic powder, but in order to use the confidence, we must also check on environmental protection.

At present, there are many kinds of popular environmental standards in the market. They are really mixed, fake and mixed, and it is not easy to choose a “green product”. How to identify it? In fact, it is very simple: the state expressly stipulates that only products that pass the “Ten-ring certification” of the State Environmental Protection Administration can be called “green products”. In other words, only the “Ten-ring certification” is the most reliable certification. If manufacturers show other green product certifications, consumers should pay attention to it, and maybe there will be "delicious" inside.

The third point: health requirements - pollution control! "The decoration pollution" is not only terrible, but also difficult to control. Even though each product can meet environmental standards, it is not a matter of environmental protection when ten products are piled together in a house. This is the so-called “accumulation effect”.

In the past, we chose quality, selected environmental protection, and today we must choose health! A product quality can reach the national standard, we say it is a "conventional product", we can say that it is a "green product" through environmental protection certification, only we can effectively control all kinds of pollution and promote human health is what we need "health product"

Although the popularity of putty is not high, but there is already a "healthy putty" appeared. When choosing a putty, try to find it carefully. Maybe you can find more surprises.

Inner and outer wall water putty production process:

(1) Flying powder (or large white) 700-750 kg of gray calcium 250-300 kg of rubber powder 7-10 kg.

(2) Talc powder 100 kg gray calcium powder 200 kg fly powder 60 0 kg white cement 100 kg rubber powder 7-11 kg

(2) Exterior wall putty powder formula

(1) 425# white cement (black cement) 200-30 0 kg gray calcium powder 15 0 kg double fly powder 45 kg 0 talcum powder 100-150 kg rubber powder 10-15 kg

(2) White cement 300 kg gray calcium 150 kg quartz sand 200 kg (80-120 mesh) fly powder 350 kg (150-200) rubber powder 12-15 kg

(3) External wall cracking and seepage putty powder

White cement 350 kg gray calcium 17 0 kg quartz sand (100 mesh) 150-200 kg quartz powder 300 kg wood fiber 0.1 kg rubber powder 20-25 kg

(4) External wall putty powder %

White cement (or Portland cement) 400 kg of quartz sand (100 mesh) 300 kg of quartz powder 300 kg of rubber powder 18-25 kg

3, powdered steel imitation ceramic coating production process

Flying powder 600 kg (400 mesh) gray calcium 300 kg light calcium 100 kg rubber powder 8-12 kg

Putty powder use operation precautions:

1. Sometimes the finished product will be subject to powder removal phenomenon and rough feel is the problem?

A: This is a problem that the customer has very common impure fillers. To check the problem of gray calcium and cement in the filler, check the gray calcium in Beijing, Hebei, Shanxi, Shandong, Henan, and Shenyang markets with over 60-70. %, cement containing more than 60% of white, or did not grasp the calendering time in the construction (80% dry is the best time calendering), which caused the phenomenon of powder removal. Feel is not smooth, mainly due to heavy calcium and gray calcium not reaching 400 meshes.

2, check the gray calcium, cement is the authentic product how to test?

A: It is very simple, the gray calcium, cement, respectively, with water transferred into a paste, scraped onto the wall, dry and wipe by hand, if the hardness is not powder is the authentic quality of the qualified, otherwise it is fake and shoddy products.

Application use

It is mainly used for the foundation of architectural interior and exterior wall decoration paints, and now it includes the use of board putty on wood ceilings, tile adhesives, and the like that cannot be used for different purposes. It is used for special board, Masek, mortar and other purposes. The exterior wall is used for painting, insulation and waterproofing.