The annual Guangzhou International Lighting Exhibition is held as scheduled. As the largest lighting exhibition in the world, many lighting companies are eager to move and hope to attract more consumers. On the occasion of the opening of this lighting, Xiao Bian was fortunate to interview Mr. Hu Zhongshun, the general manager of Guangzhou Guangya Messe Exhibition Co., Ltd., the organizer of the exhibition, to preview the holding situation and development trend of this year's lighting exhibition.
Q: Hello, Mr. Hu! At present, what is the progress of the preparations for the 19th Lighting Exhibition in 2014? What is the situation of investment promotion?
A: The lighting exhibition has completed the preparatory work in a month or two. This lighting exhibition has a history of 19 years and is a very mature exhibition, so all aspects of the preparatory work have progressed very smoothly.
The entire scale has increased by 20,000 square meters compared with last year, and the total area of ​​lighting exhibitions and architectural exhibitions is 245,000 square meters. For exhibitors, this year's lighting exhibition has decreased from last year, with 2,621.
Q: Why are exhibitors reduced?
A: In fact, it should have a certain relationship with the development of this industry. The original large-scale enterprises are now getting bigger and bigger. However, I estimate that the entire industry is now facing an integration period and a transition period. Some enterprises can Successful transformation, another part of the enterprise failed to transform. Moreover, for exhibitors, it is not expensive.
Q: Do you think there is any new trend and change in this year's lighting exhibition compared with previous years? What is the development trend?
A: The scale of our exhibition is expanding, the exhibition area is increasing, but the number of exhibitors is decreasing. In fact, this also reflects the changes in the market. Our pavilion has more than 200,000 square meters, and the newly added enterprises account for 70% of the area. This reflects the increasing number of lighting companies and the increasing scale. In recent years, many companies are producing LED lights in large quantities, vigorously promoting LED lights, and consumers also recognize LED lights. Its market prospects are broad, so LED lights are the development trend of the entire lighting industry.
Successful exhibitions take time to accumulate and grow
Q: What conditions do you need for the exhibition to be successful in organizing an exhibition?
A: First, any successful large-scale exhibition takes a long time to "raise" it, and it takes time to accumulate and grow. Second, we need the support of the industry in the region. For example, some exhibitions we hold in Guangzhou will definitely have a production base for this product in Guangzhou. Third, it is the consumption power of the local market. The strong market power can stimulate consumption growth, and the industrial base is very important. Fourth, the exhibition company, a large exhibition company, will have a huge network, can integrate a large number of resources, have a large amount of market data, and can accurately locate the exhibition projects.
Q: From the perspective of exhibitors, what factors will affect the exhibitors' participation?
A: First of all, this has a lot to do with the competitiveness of the company's own products. The quality of the products is good, and there are unique ideas to be more competitive. Secondly, the exhibitors should not simply lock the purpose of the exhibition to receive orders. The number, the number of customers, but should be to attract more potential customers, promote their own image, build a brand, for this exhibitor to do a lot of preparation work; finally, is the exhibition's own factors, companies participate in some Larger and more mature exhibitions can get more industry market information and resources.
Specifically, for example, the company has placed the exhibition hall in a beautiful atmosphere, embodying the cultural concept of the company, and exhibiting some new products with unique design and high cost performance, which can enhance the exhibition effect of the enterprise.
LED lamp development has a process that needs to be slowly precipitated
Q: The exhibition can predict the future development trend of the industry to a certain extent. Overall, what do you think is the future development trend of China's lighting industry?
A: This is really not accurate. Because this itself is affected by various factors such as market and enterprise. However, it is foreseeable that the future LED lamp market is very promising. As the purchasing power of consumers increases, the requirements for the appearance and performance of the lamps are also increasing. In the past, when people mentioned lighting, they only knew that there were several lights in their homes. But now there are a lot of billboards and advertising lights on the market, and many of them are LED lights. It can be said that this market is getting bigger and bigger.
Q: Not long ago, IKEA announced that it will only sell LED lights after 4 years, but there are often news that the LED light detection is unqualified. How do you think about the development of LED lights?
A: Any new product will go through such a process. A new product needs a process from birth to development to perfection. As for the unqualified LED lights, the market needs a transition period to eliminate and precipitate, and the relevant departments also need certain management. Consumers will slowly give up these inferior products and accept some products with high brand value and high quality. However, the industry is generally optimistic about the development prospects of LED lights.
Guangya builds a communication platform for enterprises and consumers
Q: In addition to the lighting exhibition and mold exhibition, does Guangya Messe Frankfurt have other exhibitions in other fields?
A: Our company actually has many other exhibitions, such as Industrial Automation Exhibition, Wire and Cable Exhibition, Sound and Sound Exhibition, etc. It is mainly biased towards industrial and technical categories, because we think this type of product is for the exhibition. The dependence of the meeting is very large, and it is necessary to build a bridge between the company and the customer through the bridge of the exhibition. The lighting exhibition is the largest exhibition of our company and the largest lighting exhibition in Asia.
Q: Looking at the current market situation, what is the future development of Guangya?
A: First of all, our company will look for better partners and cooperation projects, such as some foreign exhibition companies. Secondly, we also have our own website - Aladdin. We are not just exhibition companies. Complementing each other and promoting each other, this is also our advantage. Finally, in fact, the exhibition company is also facing integration, we are facing challenges, and there are opportunities, we will continue to look for big development opportunities, if we are optimistic about a certain field, Will continue to develop.
However, we will continue to do this in the lighting exhibition, because over the years, our company has accumulated a lot of resources and talents. At the same time, we are constantly innovating. For example, we will conduct forums, organize events, and import them online. More organizations in foreign countries, our company will strive to find more resources every year, so that exhibitors can get better benefits through the exhibition. Every exhibition can basically achieve the results we expected. We are full of confidence and believe that we can do better and better in the future!
Q: Thank you very much Hu for accepting our interview!
The article is from the Pacific Home Network.
Precision Grinding And Polishing Machine
Ultra-precision cutting Ultra-precision cutting refers to the cutting method whose surface roughness is less than Ra0.04μm. The key problem in ultra-precision machining is that the thin surface layer of 0.1μm is cut in the final step. This requires both an extremely sharp tool with a radius of the blunt circle of the tool at the nanoscale and a tool with enough durability to keep it sharp. At present, only diamond tools can meet the requirements. In ultra-precision cutting, the cutting speed should be very high and the cutting amount should be small to ensure that the residual area on the workpiece surface is small, so as to obtain minimal surface roughness
Precision Grinding And Polishing Machine,Hi Tech Lap Grinder,Grinding And Buffing Machine,Diamond Grinding And Polishing Machine
TROJAN (Suzhou) Technology Co., Ltd. , https://www.troolymaterial.com