[Asia Fluid Network News] injection pump use, certainly there will be some conditions. If some faults can be promptly discovered and corrected in time, it will have a very positive effect on the life protection of the grouting pump and the guarantee of the effect of use. So grouting pump situation, grouting pump fault solution what? Grouting pump fault solution Fault one: the pressure pump is damaged Cause: The voltage is too high pressure is too large. Solution: replace the pressure pump. Fault two: high-pressure grouting pump can not increase the reason: the barrel is blocked. Troubleshooting: Clear the cartridge inside the residue, the barrel inside the obstruction to remove clean; Loosen the pump end of the connector, clear the pump inner and the ball spring. Fault three: drill holder and fuselage joints loose reasons: high pressure grouting pump in the process of running because of body vibration, will lead to loosening. Troubleshooting: Remove the electric drill, remove the gear inside the drill holder, locking it. The pressure pump is damaged, the drill holder and the fuselage joints loose, high pressure grouting pump can not increase the grouting pump is more common in the process of failure, with the development of grouting pump, these faults have been very good Solution. The use of each device will encounter some problems, but as long as the timely correction, I believe this will minimize the work injury.
Measuring Tape,Small Tape Measure,Custom Tape Measure,Personalized Tape Measure
SHANGQIU CHAOYUE MEASURING TOOLS CO., LTD , https://www.equipmentool.com