The water heater has now become an indispensable electrical appliance for every household. However, after the water heater is selected, the installation is not so simple. The environment it requires is very good. Otherwise, it may bring about certain security risks. So Xiao Bian came today. To tell you how to install the gas water heater is safe:
Energy rate heater
Gas water heater power supply what are the requirements?
The power plugs and sockets shall be installed in locations protected from rain and splash, and shall not be plugged and plugged with wet hands. At the same time, only professional personnel are allowed to open the water heater cover, and the power plug must be turned on when the water heater is turned on. When using a water heater, do not allow water to wet the power outlet and water heater to ensure safety. The three-wire socket must be reliably grounded. After the water heater is used up, unplug the power plug. The replacement power cord must be replaced by a professional technician appointed by the manufacturer. Any unauthorized person must not disassemble or replace the power cord without authorization to avoid accidents.
Gas water heater installation environment
When the water heater is installed, both sides should be more than 50mm away from flammable materials, and the wall or ceiling should have a heat insulation layer of 20mm or more, or be a heat-resistant layer or heat-resistant material, and the flue gas ducts should be installed at a distance of 0 or more. It is forbidden to install the water heater in a closed cabinet.
Gas water heater in the use of the process, how to check whether the various parts of the leak?
Use soapy water to inspect each joint and keep it for 3 minutes without any air leaks, which proves that the joints are well sealed.
Gas water heater how to change the gas source?
According to the different types of gas water heaters, the parts that need to be replaced during the restructuring are also different. In general, if you change between natural gas and liquefied gas, just replace the nozzle. When changing between artificial gas and natural gas (liquefied gas), replace the nozzle and gas valve.
Can a gas pipe be installed in a ceiling?
The flue should not be buried in the ceiling as much as possible. In the last resort, it must be covered with insulation material with a thickness of 20mm or more.
Rinnai water heater and water heater brand gas water heater socket appliance home cabinet
Led Shoebox,Road Lamp Shoe Box,Ip65 Shoe Box Light,Led Area Shoebox Light
Fuonce Lighting , https://www.fuonce.com