[China Superhard Materials News] On October 26th, Fu Nike CBN tool new product release and technical exchange meeting was held in Zhengzhou Jiangnan Spring Hot Spring Hotel. Yan Hua, General Manager of Fenike Superhard Materials Co., Ltd., Zhang Taihe, Chief Engineer of Technology, Li Jian, Director of Engineering Technology R&D Center, Li Gang, Marketing Director, Roller Industry, Auto Parts Industry, Large Gear Industry, Slurry Pump from all over the country The industry, China's super-hard materials industry authoritative media China super-hard materials network and outstanding representatives of foreign manufacturers, a total of more than 100 people attended the meeting. At the same time, this meeting specially invited the chairman of the former China Machine Tool Industry Association Tool Branch, the technical committee member, the professor-level senior engineer Mr. Zhao Bingyan; the director of the Institute of Superhard Tool Materials of China University of Mining and Technology, Professor Deng Fuming; Henan University of Technology, Materials Science and Professor Li Zhengxin, deputy dean of the School of Engineering, attended the meeting. The meeting was hosted by Li Gang, Marketing Director of Henan Fenike Superhard Materials Co., Ltd. 
Yu Hua, General Manager of Fu Nike Superhard Materials Co., Ltd. delivered an opening speech 
Li Gang, Marketing Director of Fenike Henan Fenike Superhard Materials Co., Ltd., presided over the meeting 
Mr. Zhao Bingyan, the chairman of the former China Machine Tool Industry Association Tooling Committee, member of the technical committee, and professor-level senior engineer, discussed the role and operation of tool dealers under the new situation. 
Professor Deng Fuming, Director of the Institute of Superhard Tool Materials, China University of Mining and Technology, “Several Problems in High-Speed ​​Hard Cutting of PCBN Tools†
Prof. Li Zhengxin, Associate Dean of School of Materials Science and Engineering, Henan University of Technology, China Mr. Yan Hua, General Manager of Fenike Superhard Materials Co., Ltd. expressed gratitude to the industry experts and representatives of outstanding national manufacturers attending the conference. In his speech, Yan Hua said that since its inception in 1996, the company has been focusing on CBN materials and has strong research and development capabilities. The company hopes to promote the application of CBN abrasives in the market through the promotion of CBN tools in the market. 
Fu Nike CBN tool new product launch conference and technical exchange meeting site 
Fu Nike CBN tool new product launch conference and technical exchange meeting The practice has proved that Fu Nike's tool products have very good applications in metallurgical rolls, pumps and auto parts processing. Along the way, the company's performance is also constantly improving. In 2002, the company compiled the national standard for cubic boron nitride abrasives in China; in 2003, it introduced cubic boron nitride cutters; in 2005, the company established the only provincial R&D center for cubic boron nitride and products; The company has passed the certification of quality management system, employee health and safety management system and environmental management system. Since 2007, Fenike's products have launched a series of products with high wear resistance, impact resistance and high sharpness. As of 2012, Fenike has produced 70 national patents, including five invention patents. The acquisition of these intellectual property rights has added a weight to the company to further broaden the market. We have reason to believe that with the support of the representatives of Fenike, the company's cooperation with domestic and foreign companies will go further and further. 
Zhang Taihe, Chief Engineer of Fu Nike Superhard Materials Co., Ltd. “Recommendation of New CBN Tools from Fenike†Zhang Taihe, Chief Engineer of Fenike Superhard Materials Co., Ltd., introduced the company’s several in the introduction of the new CBN tool for Fenike. A new type of CBN tool: super welding tool, FBN6000 and FBS7000. Mr. Zhang showed the excellent performance of Fu Nike's new CBN tool through video demonstration and parametric analysis of the image. The good application of CBN tools in continuous processing and intermittent processing makes the delegates marvel at the same time while watching. Zhang Taihe said that the combination of wear resistance, toughness and heat resistance of the new generation of FNK CBN tools has revolutionized and revolutionized both quality and cost performance. Not only suitable for finishing (cutting depth is 0.03~2mm), but also suitable for roughing cutting depth (3~30mm). Not only suitable for high speed cutting (200~2000m/min), but also suitable for medium and low speed cutting (5~60m/min). It is not only suitable for processing like high-speed steel rolls, but also for processing difficult materials. Not only suitable for light load stable cutting, but also for heavy duty interrupted cutting. Today, Fenike's CBN series of tools have become the tool of choice for the machining of cast iron and hardened steel materials; it has become a replacement for some of the hard alloys and coated inserts; it has become the product of most applications in place of ceramic tools. With the launch of new products and further expansion of production capacity, Fu Nike will provide quality products and services for more customers! 
Xingtai Delong Machinery Niu Xinqiang, "The Practice of Fu Nike Cutting Tools in Roll Processing" 
Langfang ASIMCO Meilian Zhao Zhiqiang talks about the performance of Fu Nike CBN tool in the field of brake pad processing 
CITIC Heavy Industry Xu Rui talks about "Chong Nike CBN tool cutting large gears" 
Wu Debao, Shiheng Special Steel of Jinan Iron and Steel Group, talks about the application of Fu Nike CBN tool in high hardness roll shaft 
Liu Donglu, a powerful pump industry in Shijiazhuang, talks about the application of Fu Nike CBN tool in the slurry pump industry. 
Hunan Rui Te Teng civilization talks about the application of Fu Nike cutters in foreign industries 
Li Gang, Marketing Director of Fenike Superhard Materials Co., Ltd., “Service Creation Value – The Service of Fu Nike†At the new product launch conference, the former China Machine Tool Industry Association Tool Branch Chairman, Technical Committee Member, Professor High Mr. Zhao Bingqian; Professor Deng Fuming, Director of Superhard Tooling Materials Research Institute, China University of Mining and Technology; Professor Li Zhengxin, Associate Dean of School of Materials Science and Engineering, Henan University of Technology; and representatives from the roll industry, auto parts industry, large gear industry, and slurry pump industry Speaking from a theoretical, market and application perspective, the development history of CBN tools was comprehensively summarized, which made the conference extremely valuable in academic value, market analysis value and new product research value. In 2012, the new product launch conference of Fu Nike was successfully concluded in the keynote speech of Marketing Director Li Gang on "The Way of Service of Fenike".
Yu Hua, General Manager of Fu Nike Superhard Materials Co., Ltd. delivered an opening speech Li Gang, Marketing Director of Fenike Henan Fenike Superhard Materials Co., Ltd., presided over the meeting Mr. Zhao Bingyan, the chairman of the former China Machine Tool Industry Association Tooling Committee, member of the technical committee, and professor-level senior engineer, discussed the role and operation of tool dealers under the new situation. Professor Deng Fuming, Director of the Institute of Superhard Tool Materials, China University of Mining and Technology, “Several Problems in High-Speed ​​Hard Cutting of PCBN Tools†Prof. Li Zhengxin, Associate Dean of School of Materials Science and Engineering, Henan University of Technology, China Mr. Yan Hua, General Manager of Fenike Superhard Materials Co., Ltd. expressed gratitude to the industry experts and representatives of outstanding national manufacturers attending the conference. In his speech, Yan Hua said that since its inception in 1996, the company has been focusing on CBN materials and has strong research and development capabilities. The company hopes to promote the application of CBN abrasives in the market through the promotion of CBN tools in the market. Fu Nike CBN tool new product launch conference and technical exchange meeting site Fu Nike CBN tool new product launch conference and technical exchange meeting The practice has proved that Fu Nike's tool products have very good applications in metallurgical rolls, pumps and auto parts processing. Along the way, the company's performance is also constantly improving. In 2002, the company compiled the national standard for cubic boron nitride abrasives in China; in 2003, it introduced cubic boron nitride cutters; in 2005, the company established the only provincial R&D center for cubic boron nitride and products; The company has passed the certification of quality management system, employee health and safety management system and environmental management system. Since 2007, Fenike's products have launched a series of products with high wear resistance, impact resistance and high sharpness. As of 2012, Fenike has produced 70 national patents, including five invention patents. The acquisition of these intellectual property rights has added a weight to the company to further broaden the market. We have reason to believe that with the support of the representatives of Fenike, the company's cooperation with domestic and foreign companies will go further and further. Zhang Taihe, Chief Engineer of Fu Nike Superhard Materials Co., Ltd. “Recommendation of New CBN Tools from Fenike†Zhang Taihe, Chief Engineer of Fenike Superhard Materials Co., Ltd., introduced the company’s several in the introduction of the new CBN tool for Fenike. A new type of CBN tool: super welding tool, FBN6000 and FBS7000. Mr. Zhang showed the excellent performance of Fu Nike's new CBN tool through video demonstration and parametric analysis of the image. The good application of CBN tools in continuous processing and intermittent processing makes the delegates marvel at the same time while watching. Zhang Taihe said that the combination of wear resistance, toughness and heat resistance of the new generation of FNK CBN tools has revolutionized and revolutionized both quality and cost performance. Not only suitable for finishing (cutting depth is 0.03~2mm), but also suitable for roughing cutting depth (3~30mm). Not only suitable for high speed cutting (200~2000m/min), but also suitable for medium and low speed cutting (5~60m/min). It is not only suitable for processing like high-speed steel rolls, but also for processing difficult materials. Not only suitable for light load stable cutting, but also for heavy duty interrupted cutting. Today, Fenike's CBN series of tools have become the tool of choice for the machining of cast iron and hardened steel materials; it has become a replacement for some of the hard alloys and coated inserts; it has become the product of most applications in place of ceramic tools. With the launch of new products and further expansion of production capacity, Fu Nike will provide quality products and services for more customers! Xingtai Delong Machinery Niu Xinqiang, "The Practice of Fu Nike Cutting Tools in Roll Processing" Langfang ASIMCO Meilian Zhao Zhiqiang talks about the performance of Fu Nike CBN tool in the field of brake pad processing CITIC Heavy Industry Xu Rui talks about "Chong Nike CBN tool cutting large gears" Wu Debao, Shiheng Special Steel of Jinan Iron and Steel Group, talks about the application of Fu Nike CBN tool in high hardness roll shaft Liu Donglu, a powerful pump industry in Shijiazhuang, talks about the application of Fu Nike CBN tool in the slurry pump industry. Hunan Rui Te Teng civilization talks about the application of Fu Nike cutters in foreign industries Li Gang, Marketing Director of Fenike Superhard Materials Co., Ltd., “Service Creation Value – The Service of Fu Nike†At the new product launch conference, the former China Machine Tool Industry Association Tool Branch Chairman, Technical Committee Member, Professor High Mr. Zhao Bingqian; Professor Deng Fuming, Director of Superhard Tooling Materials Research Institute, China University of Mining and Technology; Professor Li Zhengxin, Associate Dean of School of Materials Science and Engineering, Henan University of Technology; and representatives from the roll industry, auto parts industry, large gear industry, and slurry pump industry Speaking from a theoretical, market and application perspective, the development history of CBN tools was comprehensively summarized, which made the conference extremely valuable in academic value, market analysis value and new product research value. In 2012, the new product launch conference of Fu Nike was successfully concluded in the keynote speech of Marketing Director Li Gang on "The Way of Service of Fenike".Modern sweeping linear style. the towel racks are finished in high quality white finish. The only place to dry your towels neatly. It is not just about functionality and design, but also quality: this rail will last for years to come.
Towel Rack,Hand Towel Holder,Towel Bar,Towel Hanger
Kaiping city Pinsen Sanitary ware Co.,Ltd , https://www.corpthen.com