Fingerprint lock fourth generation "automatic lock body" pioneering technology was born

The society continues to develop and the security environment in China has been improved. However, according to reports from the news media, there are still some crimes such as house burglary and violent unlocking in the garden community across the country. The Chinese living environment needs to be improved and prevented. According to the customer's constant feedback, the first generation of the company developed the fourth generation of automatic lock body, that is, the door automatically pops up the multi-locking lock tongue and the heaven and earth pole. This is the most superior mortise lock body so far, with the highest security performance, allowing users Use it safer and more secure.

The fourth-generation automatic lock body equipped with the Jierer fingerprint smart lock is not only made of 304 pure stainless steel, but also integrates the multi-locking lock tongue with the transmission parts to distinguish it from the general product ferrule, and the bolt is connected with the iron piece. When the connecting bolt is closed by the convection wind flapping door, the bolt is broken when it is stressed.

At present, most of the fingerprint smart lock products are stuck in the second generation of the mortise lock body due to the failure of the process, and the shortcomings are very obvious. It is easy to forget to lift the handle when going out, and use the card or ID card to open the door. The security risks are very obvious.

The first initiative can guide the whole trend; backwardness can only follow the trend, and even follow is not qualified. If you want to be more innovative, you need to come up with something more advanced. If you want to be more advanced, you need to keep researching and deepening until you reach a realm that others have never reached before you can stand in the forest of the world. With the pioneering concept, the first generation of the fingerprint lock of the fingerprint smart lock is the fourth generation of “automatic lock body” technology, which meets the needs of the development of smart life and realizes the high, precise and sharp fingerprint intelligent lock technology.

BMI Tape Measure

Introduction

BMI(Body Mass Index) is a person's weight in kilograms divided by the square of height in meters.

In general, BMI is an inexpensive and easy-to-perform method of screening for weight category, for example underweight, normal or healthy weight, overweight, and obesity.

About Materials and Shape of Case

The BMI calculator is ABS case, PVC coated fiberglass tape.
BMI tape measure has several kinds of case shapes-round shape, heart shape, and drip shape. Today we will introduce this round and biggest one for you.

About Language Version of Wheel Plate

This is the most popular English version.
We have Spanish version and other language versions.

About Tape Sizes

The tape both sides with 150cm, one side for male and the other side for female.
To check your waist size, the tape marked with 3 colors zones (green for healthy, orange for over weight, red for over obese)
There are 2 widths for the tapelines: 13mm and 7.5mm

About Usage

On the case, there is a wheel which can be rotate. Body height data in cm and inch marked on wheel, and weight data on the case, when we rotate the wheel, we can match the height and weight, then check the BMI arrow point to which section(there are 5 sections:underweight,healthy,overweight,obese and very obese)

For example, you are 160cm height and weight 55kgs, match them, then check the BMI arrow point to healthy.

BMI Categories

Less than 20: Underweight

From 20 to 25: HEALTHY

From 25 to 30: OVERWEIGHT

From 30 to 40: OBESE

More than 40: VERYOBESE

Spanish BMI Tape Measure,Medical BMI Measuring Tape,Body BMI Tape Measure

Wintape Measuring Tape Company , https://www.wintapetape.com