Fasteners typically include the following 12 types of parts:
1. Bolt: A type of fastener consisting of a head and a Screw (a cylinder with an external thread). It is required to be fitted with a nut for fastening two parts with through holes. This type of connection is called a bolted connection. If the nut is unscrewed from the bolt, it is possible to separate the two parts, so the bolt connection is a detachable connection.
2. Stud: A type of fastener that has no head and only has threads on both ends. When connecting, one end must be screwed into the part with the internally threaded hole, the other end is passed through the part with the through hole, and then the nut is screwed, even if the two parts are fastened together as a whole. This type of connection is called a stud connection and is also a detachable connection. It is mainly used for the case where one of the connected parts has a large thickness, requires a compact structure, or is not suitable for bolting due to frequent disassembly.
3. Screw: It is also a kind of fastener consisting of two parts, head and screw. It can be divided into three categories according to the purpose: Machine Screw, set screw and special purpose screw. The machine screw is mainly used for a tightly threaded part and a tight connection between a part with a through hole and does not require a nut fit (this type of connection is called a screw connection and is also a detachable connection; Fitted with a nut for a secure connection between two parts with through holes.) The set screw is primarily used to secure the relative position between the two parts. Special purpose screws such as eyebolts are used for lifting parts.
4. Nut: With internal threaded hole, the shape is generally flat hexagonal column shape, but also has a flat square column or a flat cylindrical shape. It is matched with bolts, studs or machine screws for fastening two parts. It becomes a whole.
5. Self-tapping screws: Similar to machine screws, but the threads on the screw are dedicated self-tapping screws. It is used to fasten and connect two thin metal members to make them a whole. The components need to be made into small holes in advance. Because of the high hardness of the screws, they can be directly screwed into the holes of the components. Form a responsive internal thread. This type of connection is also a detachable connection.
6. Wood screws: Also similar to machine screws, but the threads on the screw are special wood screws with ribs that can be screwed directly into the wooden component (or part) for a metal (or non-metal) with a through hole. The parts are fastened together with a wooden component. This connection is also a detachable connection.
7. Washer: A type of fastener that is oblate in shape. Between the support surface of the bolt, the screw or the nut and the surface of the connecting part, it increases the contact surface area of ​​the connected part, reduces the pressure per unit area and protects the surface of the connected part from damage; another type of elastic washer, It also acts to prevent the nut from loosening.
8. Retaining ring: It is installed in the shaft groove or hole of the machine and equipment, and plays the role of preventing the left and right parts of the shaft or the hole from moving.
9. Pin: It is mainly used for part positioning, and some can also be used for connecting parts, fixing parts, transmitting power or locking other fasteners.
10. Rivet: A type of fastener consisting of two parts, the head and the shank, used to fasten the two parts (or components) with through holes to make them integral. This type of connection is called a rivet connection, referred to as riveting. Dependent and non-detachable connection. Because the two parts that are joined together must be separated, the rivets on the part must be destroyed.
11. Assembly and connection pair: The assembly refers to a type of fastener supplied in combination, such as a certain machine screw (or bolt, self-supply screw) combined with a flat washer (or Spring washer, lock washer); A pair of fasteners that supply a combination of special bolts, nuts, and washers, such as high-strength large hex head bolts for steel structures.
12. Solder Nail: Due to the different types of fasteners consisting of light energy and nail head (or no nail head), it is fixedly attached to a part (or component) by welding to connect with other parts.
Concerned about surprises
Tags: Fasteners Studs Self-tapping screws Wood screws Upper nuts
Previous: Basic knowledge of metalworking tools Next: Common faults in power cable use
Dish Rack,dish drying rack,kitchen dish rack,dish drainer rack,dish rack sink,etc. The materials used are 304 stainless steel, easy to clean, never rust!
China Kichen Rack,Sink Grid,Stainless Mesh Storage Baskets,Kitchen Wire Storage, we offered that you can trust. Welcome to do business with us.
Kichen Rack is made of high quality 304 stainless steel, This kind of material steel luxury, never rust, resist corruption, easily clean, safe, healthy and durable. Prevent rust or chemicals from contaminating food and damaging health
kitchen dish rack,dish drainer rack,dish rack sink,Kitchen drying rack,Stainless steel drying rack
Shenzhen Lanejoy Technology Co.,LTD , https://www.ccls-vaccine.com