The epoxy resin thin coating material produced by our company is a high performance epoxy coating with strong coverage and good bonding performance. The utility model has the advantages of simple construction, brushing and coating, and the film has high hardness and good toughness after being completely hardened, so it has excellent wear resistance.

Construction environment requirements :

1, the construction of the ambient temperature should be controlled at 1 0 ℃ -3 5 ℃;

2. The moisture content of the base layer cannot exceed 5%.

3, the air humidity should be less than 75%

4. The ambient temperature of the construction should be higher than the dew point temperature by more than 3 °C.

Construction steps:

1. Ground treatment: Firstly, the original ground should be completely polished. The unevenness should be repaired and leveled, then cleaned and vacuumed. The wet place should be dried first.

2. Primer: strictly according to the weight ratio (see barrel paste), mix the primer A and the primer B thoroughly, and mix it quickly with a paint mixer. Apply it to the original ground with a roller or a trowel. Formed with a dust-proof, strong adhesion under curing

3. Middle coating: In strict accordance with the weight ratio, the surface coating A material and the surface coating material B are thoroughly mixed, and then uniformly stirred by a paint mixer, and then uniformly coated on the primer by a roller.

4. Top coating: Strictly mix the surface coating material A and the surface coating material B according to the weight ratio, and mix it quickly with a paint mixer. Then roll it evenly on the middle coating with a roller (or use a trowel to apply it) Apply over) to form a dust-proof, brightly colored finish.

Slotted Nuts

Slotted Nuts

Slotted Nuts,Nuts Screws,Hexagon K Nuts,Open End Rivet Nut,Carbon Steel Flat Head Rivet Nut

Suzhou Gubao Screws Co.,Ltd. , https://www.gbscrewes.com