Home>Bearing knowledge> Detailed analysis: Dealing with the problem of "bearing damage"

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Detailed analysis: Dealing with the problem of "bearing damage"

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Bearings are attributed to fine parts; therefore, the demand is quite stable when used; that is, the use of high-function thrust ball bearings; if not used properly; can not reach the expected function; and simply damage the bearings. Thus; Eastern Hemisphere Hardware Net professionals advocate the use of bearings should focus on the following:
Usually grease is smooth; does not remove the bearing; directly fills the smooth grease. When the oil is smooth; usually does not need to be removed; however; for instruments or high-speed bearings, etc.; to be cleaned with clean oil; remove the rust inhibitor applied to the bearing . Remove the bearing of the rust inhibitor; easy to rust; so can not be placed at will.
First, use appropriate and precise devices to try to use special things; try to avoid the use of cloth and short fibers and the like.
Second, the use of the device should be careful not to allow strong stamping; do not allow the hammer to directly hit the bearing; do not allow the pressure to pass through the rolling body.
Third, to avoid the corrosion of the bearing directly when taking the bearing by hand; to wash away the sweat on the hand; and apply high-quality mineral oil before operation; especially in the dry season and summer to pay attention to rust.
Fourth, adhere to the bearing and its surrounding environment, even if the invisible shallow dust enters the thrust ball bearing; it will also add bearing wear; oscillation and noise.

---

Recommend to friends comments close window

Bearing related knowledge

Key skills of wind power bearings Timing smooth protection of bearings can be used for the highest bearing life. High-speed spindle bearings for the smooth analysis of the characteristics of deep groove ball bearings Cylindrical hole NTN bearing using press method

This article links to http://
Please indicate the bearing network http://

Previous: What is the dimension of the bearing?
The next part: Common equipment for bearing ring casting (2)

Wood Doors

Wood Doors ,Solid Wood Exterior Doors,5 Panel Interior Door,Wooden Bifold Doors

Foshan QI'AN Fireproof Shutter Doors Co., Ltd , https://www.fsqianfiredoor.com