Woodworking acceptance
The acceptance of woodworking is mainly reflected in:
(1) Whether the structure is straight. Whether horizontal or vertical, the correct carpentry practices should be straight.
(2) Is the corner accurate? The normal corners are all 90 degrees, except for special design factors.
(3) Whether the spelling is strict and accurate. The correct wooden pattern is to be seamless or to maintain a uniform distance.
(4) Whether the radian and roundness are smooth and sleek. In addition to a single, a number of the same shape to ensure consistency in the shape.
(5) Whether the cabinet door switch is normal. When the door is open, it should be light and no noise.
(6) There should be no gaps in the fixed wall of the cabinet.
(7) Whether or not the woodworking project is broken. It should ensure that the surface of the woodworking project is flat and there is no drum or breakage.
(8) Symmetrical carpentry items are symmetrical.
(9) There is no repair in the decorative panel nails. Of course, this is the painter's job, but as it exists in the woodworking project, it is mentioned here.
(10) Whether the connection of the ceiling angle line is smooth and whether there is any obvious unevenness or deformation.
(11) Whether the skirting line is straight and accurate on the ground.
(12) Whether the ceilings of toilets and kitchens, such as aluminum gussets and PVC gussets, are flat and have no deformation.
(13) Whether the cabinet door handle lock is installed correctly and normally open.
(14) Is the bedroom door and other doors open? When closed, the upper, left and right door joints should be tight, and the lower door gap should be moderate, generally 0.5 cm.
Villa Design Three Tree Lacquer Switch Decorative Paint Bedroom Door Cupboard Kitchen Cabinet Door Bedroom Door to Bedroom Door
Inoculating loop and needle are instruments used for inoculation, serial dilution, aseptic sampling, transfer and microbial sample coating. Options include color-coded disposable consumables made of materials such as polymers, aluminum, and other metals. The disposable inoculating loops and the inoculation needles are made of non-toxic (USP VI grade) polystyrene material, which can provide users with a smooth surface of the inoculation loop for use in vaccines and diagnostic kits, pharmaceuticals and biotechnology.
Sterile Loop,Inoculating Loop And Needle,Disposable Inoculating Loops,Sterile Inoculating Loop,Sterile Disposable Inoculating Loops
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yongyueplat.com