(1) The steel bar bending machine should be installed on a solid ground, and the flat bar should be placed in the place. The iron wheel should be triangularly symmetrical before and after. There should be enough space around the equipment. Non-operators should not enter the work area city to avoid being injured by the pile when pulling the steel bar. (2) It is strictly forbidden to bend the steel bars beyond the diameter specified by the equipment. If the hoop is not cold drawn or has a corrode, you must wear protective glasses. (3) Before and after the operation, the lubrication part should be lubricated according to the cycle. (4) The lubricating oil in the gear box and worm gear box must be replaced regularly. (5) Every time the work is completed, the rust and debris in the working ring and the inserted hole should be removed in time. (6) When it is not used for a long time, it should be coated with anti-rust grease on the processing surface, and the well should be stored in the indoor dry bath ventilation. Reprinted: http:// http://news.chinawj.com.cn
Starter Springs,Carboon Steel Spiral Spring,Springs For Seat Belt Retractors,Springs For Cord Rewinders
Ningbo Yunsheng Elastic Components Co.,Ltd , https://www.yunshengsprings.com