Complex steel scribe
Production
Product
Assume
meter
Say
Bright
Name of the work: First line
Designer: Futan
Design time: January 20, 2017
Contact information
Looking for partners with development intentions to jointly develop new products
table of Contents
One: Overview of the work
Two: creative background
Three: Introduction of the work (main function and purpose)
One: Overview of the work
Special molds for complex steels with different cross-section shapes can solve the trouble of cutting and marking in actual work.
Two: creative background
In the actual working situation, it was found that the workpiece with the shape of complex section was cut with a square rule. The scribing was very troublesome. Therefore, it was conceived that there was no way to design and produce a kind of mold and the like, and the line was drawn at one time. After more than one year. The summary of the work, according to the reverse thinking at that time, I would like to directly make the shape of the cross-section of the mold, so that you can easily cross-line
Three: Introduction to the work
Channel steel
The channel is made of two sets of molds according to a certain model, one for straight lines and the other for a commonly used 45 degree diagonal line. Each set is divided into upper and lower sides, which is determined according to the upward surface of the channel steel. In the later stage, in order to make the mold more concise, the two sets can be combined into one set for one straight line and the other side for oblique line.
The channel also has a right-angled connection. The document has a mold that sticks out the tongue, and the I-beam has a similar mold.
I-beam, angle iron, steel pipe mold principle is the same as channel steel.
Three View
Channel steel 45 degree one line on the other side
Channel 45 degree one side of the line
The other side of the channel steel line
Channel steel side
I-beam 45 degree first line
I-beam connection line
I-beam first line
Angle iron wire cutter
Angle iron right angle joint mold
3D solid figure
Channel steel 45 degree one line on the other side
Channel 45 degree one side of the line
The other side of the channel steel line
Channel steel side
I-beam 45 degree first line
I-beam connection line
I-beam first line
Angle iron wire cutter
Angle iron right angle joint mold
Stainless Steel Seamless Round Pipe
Stainless Steel Pipe is a kind of hollow long round steel, which is widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial pipelines and mechanical structural parts. In addition, when the bending and torsion strength are the same, the weight is lighter, so it is also widely used in manufacturing mechanical parts and engineering structures. It is also used for furniture, kitchenware, etc. The hardness of stainless steel pipe is usually measured by Brinell, Rockwell and Vickers. Annealed stainless steel pipe with inner diameter of more than 6.0 mm and wall thickness of less than 13 mm. Production process of stainless steel seamless pipe A. round steel preparation; b. Heating; c. Hot rolling perforation; d. Cutting head; e. Pickling; f. Grinding; g. Lubrication; h. Cold rolling; i. Degreasing; j. Solution heat treatment; k. Straightening; l. Pipe cutting; m. Pickling; n. Finished product inspection. Common materials are 201, 304 and 316.ETC
Stainless Steel Seamless Round Pipe,Seamless Steel Pipe,Stainless Steel Round Pipe,Stainless Steel Seamless Pipe
Shandong Xinsuju Steel Co.,Ltd. , https://www.sawlpipe.com