Acceptable elements of new house acceptance

After the housing decoration is completed, it is indispensable for acceptance. The owner accepted the project, and the standard was the decoration contract, the construction drawing signed by the owner and the relevant documents of the relevant state departments on the quality inspection of the decoration project. The specific acceptance was mainly from the following aspects:
Furniture: smooth lines, sealing lines, corner lines and panel interface dense, smooth, smooth sliding door cabinet drawer, handle symmetrical appearance.
Power lines: The circuit shall be laid in conformity with construction regulations and safety standards. The socket shall not be lower than 30CM from the ground. The ground of the three-wire socket shall be laid on the private line of the kitchen and air-conditioning lines. The main gate shall be equipped with a leakage prevention switch and the lamps shall be firmly installed.
Doors and Windows: The switch is free, the door frame, the window frame and the glass are well sealed.
Ground: The floor tiles are flat, with clear texture, uniform color, horizontal, vertical crosshairs, smooth floor covering, straight seams, uniform paint color, and no scratches.
Wall: The wallpaper is firmly affixed, the joints are tight, the pattern is complete, the pattern is anastomosis, the side seams are neat and free of burrs, the paint is even and smooth, the concave and convex feeling, no color difference, and no dust can be removed.
Water supply and drainage facilities: The water supply pipe has no leakage, the on-off valve operates well, and the drainage is smooth without leakage or water accumulation.
Paint: smooth paint, good feel, enough oil, no nails, scratches, burrs and color.

In short, the acceptance of new houses should be carefully and it is better to open all light sources first to avoid unnecessary troubles in the future.

Three trees Paint porch Renovation Switch lacquer Sockets Window decorations Glass bricks Chests of drawers Glass furniture Kitchen Doors Floor tiles Glass doors Kitchen glass Sliding doors

Cryo Tube

Yongyue cryo vials are made of medical grade polypropylene (PP) and have no endotoxin. They are disposable laboratory consumables specially used for storing biological samples.
The anti-slip texture of the cap and body is easy to screw cap.
The tube cap has an O-ring built-in gasket to prevent liquid leakage.
The cryo tube is suitable for ultra-low temperature refrigerators, and the tolerance temperature is -86~121 °C, and it can be repeatedly frozen and thawed.
In the gaseous state of liquid nitrogen, it can withstand low temperature to -167 ℃.
According to different requirements, there are ordinary grade and PCR grade. PCR grade products are free of DNase, RNase, endotoxin and foreign DNA. Sterilized by gamma irradiation, sterile.

Cryo Vials,Cryovial 2ml,Cryotube 1.8 ml,Cryogenic Vials,0.5 ml Cryogenic Vials

Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yypcrtube.com

Posted on